Operation; Maintenance - Husqvarna BR600 Operator's Manual

To use the attachment
1. Operate the product at full throttle/speed (or nearly
full throttle/speed) with the brush resting on the
surface.
Note: It is both tiring and unnecessary to lift or hold
the brush above the surface when working.
2. When clearing narrow surfaces such as paths, the
product can be used so that it throws materials
straight in front of you. If you want to work on wider
surfaces, you may need to work at an angle so that
strands form on one side. Strands comprising light
materials can be collected into one row or pile for
later removal while hard or more bulky materials may
need collecting in several strands.
3. In order to get into corners, remove the splash guard
and loosen the accessory coupling and rotate the
accessory half a turn.
Introduction
Below you will find some general maintenance
instructions. If you need further information please
contact your service workshop.
To do maintenance on the accessory
CAUTION: The accessory operates in dirty
conditions. If you have a gasoline operated
product, it is very important to do
maintenance of the air filter regularly. The air
filter must be lubricated with oil to operate
738 - 003 - 13.12.2019

Operation

4. Keep a small working angle to the surface. Too large
a working angle means the sweeper tends to move
towards you and you risk losing control of the
product.

Maintenance

WARNING: Rubbish will then be thrown
back towards the user. Use a lower
speed when reversing the product and
remember that it is easy to trip over.
satisfactorily. Refer to the operator's manual
of the power unit for maintenance
instructions.
WARNING: The gear housing gets hot when
the product has been in use. To avoid
burning yourself do not touch the gear
housing.
7