Rotary actuator for ball valves modbus rtu (14 pages)
Summary of Contents for Siemens OpenAir GDB111.1E/KN
Page 1
Damper actuators 5 / 10 Nm with KNX communication • GDB111.1E/KN with 5 Nm nominal torque • GLB111.1E/KN with 10 Nm nominal torque • Operating voltage AC 24 V • Supports KNX S-Mode, LTE-Mode, and PL-Link A6V11753386_en--_a Siemens 2020-02-25 Smart Infrastructure...
Page 2
Production period From 02/2020 Bus module FW version 4.25 ETS device profile v1d0.knxprod The ETS device profile can be downloaded at the following Internet address: http://siemens.com/hvac-td Product documentation Title Topic Document ID Mounting Instruction damper Mounting / installation instruction for damper...
Page 3
European Directive and may not be disposed of as do- mestic garbage. • Dispose of the device through channels provided for this purpose. • Comply with all local and currently applicable laws and regulations. 3 / 10 A6V11753386_en--_a Siemens 2020-02-25 Smart Infrastructure...
The damper actuators can be reset to the OEM default values by push-button: ▪ Press push button > 20s ▪ LED flashes orange ▪ Device restarts All parameters are set to factory settings. 4 / 10 Siemens A6V11753386_en--_a Smart Infrastructure 2020-02-25...
Page 5
Damper position which can be triggered by the 0...100% corresponding group object (with override priority) 0…100% Override position 2 Damper position which can be triggered by the 100% corresponding group object (with override priority) 5 / 10 A6V11753386_en--_a Siemens 2020-02-25 Smart Infrastructure...
Page 6
0 = Disable 1 = Enable Override position 2 Receive 1.003 _Enable 1 bit 0 = Disable 1 = Enable Opening direction Read-only 1.012 _Invert 1 bit 0 = Not Inverted 1 = Inverted 6 / 10 Siemens A6V11753386_en--_a Smart Infrastructure 2020-02-25...
Page 7
ETS parameter. Override position 2 When the object is triggered, the actuator drives to the override position 2 defined by the respective ETS parameter. Opening direction Opening direction of the air damper. 7 / 10 A6V11753386_en--_a Siemens 2020-02-25 Smart Infrastructure...
5…95 % r. F. Humidity (non condensing) Transport Climatic conditions Class 2K3 -25…70 °C Temperature Humidity 5...95 % r. h. Storage Climatic conditions Class 1K3 -5…45 °C Temperature Humidity 5...95 % r. h. 8 / 10 Siemens A6V11753386_en--_a Smart Infrastructure 2020-02-25...
Page 9
Square shaft 6...12.8 mm Min. drive shaft length 30 mm Max. shaft hardness <300 HV The documents can be downloaded from http://siemens.com/bt/download Diagrams Internal diagrams The damper actuator is supplied with two prewired cables. (CE+) (CE-) Tool (G0) Power supply and communication cables...