Page 1
Wireless multizone receiver RDE-MZ6 for floor heating / zone heating systems ∂ Mains-powered RDE-MZ6 multizone wireless receiver (AC 230 V) ∂ DIN rail mounting ∂ 2-position control with On/Off output for each zone / room ∂ Room temperature control of each zone/room ∂...
Page 2
The RDE-MZ6 is used in connection with room thermostats for zone/room temperature control in heating systems. Typical applications: ∂ Apartments ∂ Commercial spaces For the control of the following pieces of equipment: ∂ Thermal valves or zone valves ∂ Floor heating systems ∂...
Page 3
Mechanical design The RDE-MZ6 multizone receiver consists of a plastic housing which accommodates the electronics and features a built-in snap for direct mounting on DIN 35 rails (as per EN 50022). 1) Channel state LEDs for zones Operation and settings 1 to 6.
Page 4
The green LED is lit when the relay is energized. It extinguished when any other relay is deenergized. Fails to receive wireless data If the respective zone of the RDE-MZ6 fails to receive wireless data, the red LED will start to flash after 125 minutes.
Page 5
(RoHS compliance, compatibility materials composition, packaging, environmental benefit, disposal). Weight 0.482 kg General Color of housing front RAL9003 *) The documents can be downloaded from http://siemens.com/bt/download. 5 / 8 Siemens RDE-MZ6 Wireless multizone receiver CB1N1428en Building Technologies 2017-11-21...
Page 6
Connection diagrams 10 A Live, AC 230 V Neutral conductor N1 Wireless multizone receiver RDE-MZ6 Note: Use only valve actuators rated for AC24… 230V. 6 / 8 Siemens RDE-MZ6 Wireless multizone receiver CB1N1428en Building Technologies 2017-11-21...
Page 7
10 A Recirculation or pump application (DIP switch: ON/OFF) Live, AC 230 V Neutral conductor N1 Wireless multizone receiver RDE-MZ6 Note: Use only valve actuators rated for AC24… 230V. Dimensions Dimensions in mm 7 / 8 Siemens RDE-MZ6 Wireless multizone receiver...