Advertisement
Quick Links
s
CM2N1601en_04
2016-03-24
Desigo™ TRA
Freely configurable
flush-mounted room
operator unit for KNX
PL-Link
• Freely configurable user interface (keys and visual items) as part of Total
Room Automation
• Energy efficiency function ("Green Leaf
• Room temperature measurement
• Display of room temperature, control mode, scenes etc. (LCD)
• Backlit display, white or blue selection
• KNX PL-Link interface to the room automation station with plug & play
functionality
• Can be combined with different standard and design bezels
1
QMX3.P36F
QMX3.P36G
")
Building Technologies
601
Advertisement
Related Manuals for Siemens Desigo TRA QMX3.P36F
Summary of Contents for Siemens Desigo TRA QMX3.P36F
- Page 1 Desigo™ TRA QMX3.P36F Freely configurable flush-mounted room QMX3.P36G operator unit for KNX PL-Link • Freely configurable user interface (keys and visual items) as part of Total Room Automation • Energy efficiency function ("Green Leaf ") • Room temperature measurement • Display of room temperature, control mode, scenes etc. (LCD) •...
- Page 2 • The QMX3.P36... room operator unit can be used with the Desigo TRA room automation stations. • Supported bezel programs Siemens DELTA: DELTA line, DELTA miro and DELTA vita. (For the DELTA style and DELTA profil series an adapter frame for 55mm x 55mm inserts is required) Berker:(B.1, B.7...
- Page 3 – an earthing plate (quick slide connector) to connect an earthing cable • One Bezel (C) is supplied: – Siemens DELTA line (square, with the QMX3.P36F) – Siemens similar to DELTA azio 120 x 180 (rectangular, with the QMX3.P36G) Bezels from various other manufacturers can also be used (suitability to be clarified in advance).
- Page 4 • Seal the conduit box internally, as air currents in the conduit can affect sensor readings. • Adhere to allowed ambient conditions. 4 / 14 Siemens QMX3... Freely configurable flush-mounted room operator unit for KNX PL-Link CM2N1601en_04 Building Technologies 2016-03-24...
- Page 5 The operator unit may need to be dismounted from the base plate to exchange the operator unit. Hold bezel with one hand. Pull operator unit with the other hand. 5 / 14 Siemens QMX3... Freely configurable flush-mounted room operator unit for KNX PL-Link CM2N1601en_04 Building Technologies 2016-03-24...
- Page 6 After the device is commissioned, programming mode is automatically reset to “disabled”. Note: Programming mode also resets to “disabled” each time the device restarts. 6 / 14 Siemens QMX3... Freely configurable flush-mounted room operator unit for KNX PL-Link CM2N1601en_04 Building Technologies...
- Page 7 Note: The configuration file can be downloaded any time; as a result, these dots are displayed every time the room automation station initializes download. 7 / 14 Siemens QMX3... Freely configurable flush-mounted room operator unit for KNX PL-Link CM2N1601en_04 Building Technologies...
- Page 8 Information or navigation between several "pages" Info Info Info Operable Operable Operable Read-only Navigation Navigation Navigation 3 lines of information List operation Single-line operation 8 / 14 Siemens QMX3... Freely configurable flush-mounted room operator unit for KNX PL-Link CM2N1601en_04 Building Technologies 2016-03-24...
- Page 9 • Lock the buttons: Press button 6 6 • Unlock the buttons: Press buttons 2, 3 and 7 one after the other 9 / 14 Siemens QMX3... Freely configurable flush-mounted room operator unit for KNX PL-Link CM2N1601en_04 Building Technologies 2016-03-24...
- Page 10 Cables must comply with KNX specifications, see TRA Installation manual, CM111043 Housing protection Protection standard as per EN 60529 IP 30 Protection class Insulation protection class 10 / 14 Siemens QMX3... Freely configurable flush-mounted room operator unit for KNX PL-Link CM2N1601en_04 Building Technologies 2016-03-24...
- Page 11 63 g Bezel, base plate 44 g 54 g Packaging 126 g 167 g Total *) The documents can be downloaded from http://siemens.com/bt/download. 11 / 14 Siemens QMX3... Freely configurable flush-mounted room operator unit for KNX PL-Link CM2N1601en_04 Building Technologies 2016-03-24...
- Page 12 To the room unit using the tool cable and the OCI702 service interface (see data sheet A6V10438951) Note: Remove the operator unit from the base plate to connect the tool cable. 12 / 14 Siemens QMX3... Freely configurable flush-mounted room operator unit for KNX PL-Link CM2N1601en_04 Building Technologies...
- Page 13 Dimensions Operator unit Bezel DELTA line (square) Base plate square Bezel similar to DELTA azio (rectangular) Base plate rectangular 13 / 14 Siemens QMX3... Freely configurable flush-mounted room operator unit for KNX PL-Link CM2N1601en_04 Building Technologies 2016-03-24...
- Page 14 2016 Siemens Switzerland Ltd 14 / 14 Subject to change Siemens QMX3... Freely configurable flush-mounted room operator unit for KNX PL-Link CM2N1601en_04 Building Technologies 2016-03-24...