AEG BPS355020M User Manual page 33

11.2 How to clean: Cavity
embossment
Clean the cavity embossment to remove
limestone residue after cooking with
steam.
Step 1
Pour: 250 ml of white vine‐
gar into the cavity emboss‐
ment. Use maximum 6% vin‐
egar without any additives.
For the function: True Fan Cooking PLUS clean the oven for every 5 - 10 cooking cycles.
11.3 How to remove: Shelf
supports
Remove the shelf supports to clean the
oven.
Step 1 Turn off the oven and wait un‐
til it is cold.
Step 2 Pull the front of the shelf sup‐
port away from the side wall.
Step 3 Pull the rear end of the shelf
support away from the side
wall and remove it.
Step 4 Install the shelf supports in
the opposite sequence.
11.4 How to use: Pyrolytic
cleaning
Clean the oven with pyrolytic cleaning.
WARNING!
There is a risk of burns.
Step 2
Let the vinegar dissolve the
limestone residue at the am‐
bient temperature for 30 mi‐
nutes.
Step 3
Clean the cavity with warm
water and a soft cloth.
1
2
CAUTION!
If there are other appliances
installed in the same
cabinet, do not use them at
the same time as this
function. It can cause
damage to the oven.
ENGLISH 33