en | 22 | DCU 220 | Operating DCU 220
Using the BT Feature
The BT 4.0 technology allows short-range (about 50 meters) wireless communications
between devices without requiring a cable connection. Data can be transmitted through
walls, pockets and briefcases as long as two devices are within range.
Turning On/Off the BT Radio
To turn on the BT radio:
1.
Make sure that the Airplane mode is switched off. You can control the Airplane mode
using one of the below methods.
Press Fn+F1.
Use the Airplane Mode button in the OSD Control Panel.
Click
Settings Network & Internet Airplane mode. Slide the Airplane
mode switch to the Off position.
2.
If you have previously turned off the BT radio, use the below method to turn it on.
Click
Settings Devices BT. Slide the BT switch to the On position.
To turn off BT radio:
You can turn off the BT radio the same way you turn it on.
If you want to quickly turn off all wireless radio, simply switch on Airplane mode.
1 689 989 330 | 2016-11-30
Robert Bosch GmbH