Sony XBR-55X930D Service Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. LCD TV
  5. BRAVIA XBR-55X930D
  6. Service manual

Sony XBR-55X930D Service Manual

Hide thumbs Also See for XBR-55X930D:
Table of Contents

Advertisement

Quick Links

SERVICE MANUAL
ORIGINAL MANUAL ISSUE DATE: 2/2016
Version
Date
1.0
2/2016
2.0
3/2016
Subject
Original manual issue.
Addition of 75" model. (P.2, P.61, P.64~78, P.168~221, P.233~239)
Correction of information. (P.8)
GN2SK
CHASSIS
Segment: QF
LCD TV
9-888-590-02

Advertisement

Table of Contents
loading

Related Manuals for Sony XBR-55X930D

Summary of Contents for Sony XBR-55X930D

  • Page 1 SERVICE MANUAL GN2SK CHASSIS ORIGINAL MANUAL ISSUE DATE: 2/2016 Segment: QF Version Date Subject 2/2016 Original manual issue. Addition of 75” model. (P.2, P.61, P.64~78, P.168~221, P.233~239) 3/2016 Correction of information. (P.8) LCD TV 9-888-590-02...

  • Page 2: Model List

    MODEL LIST MODEL COLOR COMMANDER DEST. MODEL COLOR COMMANDER DEST. XBR-55X930D Black RMF-TX200U (UC2) US/CND XBR-65X930D Black RMF-TX200U (UC2) US/CND (LA1) MEXICO XBR-65X935D Black RMF-TX200B (LA8) CHILE PERU VENEZUELA (AR4) ARGENTINA (ECU) ECUADOR XBR-65X937D Black RMF-TX200B (CO1) COLOMBIA XBR-75X940D Black...

  • Page 3: Warnings And Cautions

    Components identified by shading and ! mark on the schematic diagrams, exploded views, and in the parts list are critical for safe operation. Replace these components with Sony parts whose part numbers appear as shown in this manual or in supplements published by Sony. Circuit adjustments that are critical for safe operation are identified in this manual.
  • Page 4 Les composants identifi es par une trame et par une marque du fonctionnement. Ne les remplacer que par des composants Sony dont le numero de piece est indique dans le present manuel ou dans des supplements publies par Sony. Les reglages de circuit dont l’importance est critique pour la securite du fonctionnement sont identifi es dans le present manuel.

  • Page 5: Use Caution When Handling The Lcd Panel

    WARNINGS AND CAUTIONS USE CAUTION WHEN HANDLING THE LCD PANEL When repairing the LCD panel, be sure you are grounded by using a wrist band. When repairing the LCD panel on the wall, the LCD panel must be secured using the 4 mounting holes on the rear cover. Do not press on the panel or frame edge to avoid the risk of electric shock.

  • Page 6: Safety Check-Out

    SAFETY CHECK-OUT After correcting the original service problem, perform the following safety checks before releasing the set to the customer: 1. Check the area of your repair for unsoldered or poorly soldered connections. Check the entire board surface for solder splashes and bridges. 2.
  • Page 7 SAFETY CHECK-OUT Leakage Test The AC leakage from any exposed metal part to earth ground and from all exposed metal parts to any exposed metal part having a return to chassis, must not exceed 0.5 mA (500 microamperes). Leakage current can be measured by any one of three methods. 1.

  • Page 8: Self Diagnosis Function

    SELF DIAGNOSIS FUNCTION The units in this manual contain a self-diagnostic function. If an error occurs, the Smart Core Red LED will automatically begin to flash. The number of times the LED flashes translates to a probable source of the problem. A definition of the Smart Core Red LED flash indicators is listed in the instruction manual for the user’s knowledge and reference.
  • Page 9 SELF DIAGNOSIS FUNCTION [SELF DIAGNOSTIC SCREEN DISPLAY] For errors with symptoms such as “power sometimes shuts off” or “screen sometimes goes out” that cannot be confirmed, Error Naming Error count it is possible to bring up past occurrences of failure for confirmation on the screen: In standby mode, press buttons on the remote commander sequentially in rapid SELF CHECK succession as shown below:...

  • Page 10: How To Enter Service Mode

    ADJUSTMENT HOW TO ENTER SERVICE MODE 1) Turn on the main power switch to place the set in standby mode. 2) Press the buttons on the remote commander as follows with the interval of one second for each push, and enter service mode. 3) Service mode display.

  • Page 11: Software Version

    ADJUSTMENT SOFTWARE VERSION 1) In Service Mode, select “Model Information”, press “Enter” or “→” button to enter Status Information. Main Micro Service Mode SW Version: Model PKG2.011.0010NAB NVM Version: 0001 UC2 Model Information >> Boot Version: V1.000 Self diagnosis History >>...

  • Page 12: Serial Number Edit

    ADJUSTMENT SERIAL NUMBER EDIT (1) 1) In “Service Mode”, select “Model Information” by pressing “↑” or “↓” then press “Enter” or Service Mode “→” button to enter inside. Model Information >> Self diagnosis History >> 2) Select “Serial Number Edit” by pressing “↑” or “↓” button then press “→” button. Video / Audio >>...
  • Page 13 ADJUSTMENT SERIAL NUMBER EDIT (2) YES is selected, the input data is saved into EEPROM. Service Mode SERIAL NUMBER EDIT is greyed out and the serial number that has been input is displayed. >> Status Information User will not able to edit anymore.

  • Page 14: Model Number Setting

    ADJUSTMENT MODEL NUMBER SETTING 1) In “Service Mode”, select “Model Information” by pressing “↑” or “↓” then press “Enter” or “→” button to enter inside. 2) Select “Model Number Setting” by pressing “↑” or “↓” button then press “Enter” or “→” button. 3) Press “↑”...
  • Page 15 ADJUSTMENT WB ADJUSTMENT c. To change data , press “←” or “→” on remote commander. (Please apply when the Main board or panel is replaced.) In “Panel/PQ” service mode. a. Go to “WB Adjustment” category by “↑” or “↓”. << Back <[ ]>...
  • Page 16 ADJUSTMENT 2. In “WB/Mura/CUC data transfer”. WB/MURA/CUC DATA TRANSFER a. Select “WB/Gamma data transfer” by pressing “↑” or “↓” on remote commander. (Please apply when the Main board or panel is replaced.) 1. In “Panel/PQ” service mode. b. To change the items, press “←” or “→” on remote commander and press “Enter” a.
  • Page 17 ADJUSTMENT HDD PERFORMANCE CHECK 1. In “Service Mode”, select “General Setting” by pressing “↑” or “↓” then press 3. A message "Please wait ..." is displayed during performance check processing. “Enter” or “→” button to enter inside. Service Mode Service Mode Model Information >>...
  • Page 18 ADJUSTMENT HDD RE-REGISTRATION 1) In “Service Mode”, select “General Setting” by pressing “↑” or “↓” then press “Enter” or “→” button to enter inside. 2) Select “AAA” by pressing “↑” or “↓” then press “Enter” or “→” button to enter inside. Service Mode General Setting Model Information...

  • Page 19: Usb Update

    USB UPDATE 1:Download USB image and unzip file. 2: copy unzip file to USB memory root folder. 3: USB memory insert TV. 4:USB image is newer soft version. 4:USB image is not newer soft version. Automatically show message and start update. Automatically show message and start update.

  • Page 20: Troubleshooting

    TROUBLE SHOOTING TRIAGE Confirm the symptom from the customer. Select that symptom from the chart. Bring all the boards and cables listed for that symptom. Follow the troubleshooting charts in the technical guides to isolate the board. Chart Color Code. RED DOT: Most likely defective part BLUE TRIANGLE: Secondary possible defective part BLACK TEXT: Board that may correct the symptom...
  • Page 21 TROUBLE SHOOTING FLOW 1-1. NO POWER (75” Model) (55”/65” Models) with G* board with AC-ADP No Power No Power Check 24V Check STBY 3.3V Replace LD Board Replace C485 C484 Between LD Board to Between G* Board to G* Board near CN401 near CN401 DPS Board Harness...
  • Page 22 TROUBLE SHOOTING FLOW 1-2-1. NO POWER U-COM FAILURE START Check MAIN_VCC Check 12.5V Line R9175 Voltage. Check C9117 Voltage. Check +3.3V_STBY (G board or IC403 on DPS). Is the voltage >1.6V? Is the voltage >3.0V? C9006, CN9000 #24pin Check P_ON_VBUS Check C9129 Voltage.
  • Page 23 TROUBLE SHOOTING FLOW 1-2-1. NO POWER U-COM FAILURE 1-2-2. NO POWER DC_OFF_DET CHECK from the previous page START Check DC_OFF_DET Check P_ON_#2 R9035 IC9017 #pin14 Change IC9017 ( IC9000 is working OK ) Is voltage < 3V? Is the voltage >3.0V? Check Vdd Check ORESETB Change IC9000...
  • Page 24 TROUBLE SHOOTING FLOW 1-3. NO POWER DDCON/LDO DDCONs check START Check fuse F9xxx / F4xx Change Fuse Is fuse OK? Check Vcc voltage Check POWER_ON IC9017 #pin19 C9xxx / C4xx (Refer 1-2 No Power U-Com Failure) Is voltage >12.0V? 1-2 No Power U-Com Failure Check Enable pin voltage Is voltage >2.5V?
  • Page 25 TROUBLE SHOOTING FLOW 1-3. NO POWER DDCON/LDO DDCON check START Check IC9001 Vcc voltage Check Vcc voltage Check Change D9000 C9033 C9061 D9000 Is voltage >12V? Is voltage >3V? Is diode ? Check +3.3V_STBY. G board or IC408 on DPS Check Vcc voltage Check C9061...
  • Page 26 TROUBLE SHOOTING FLOW 1-3. NO POWER DDCON/LDO LDOs check START Check Vcc voltage Check +3.3V_DDC_OUT C9xxx DDCON (IC409) Is voltage >3V? Check Enable pin voltage 1-2 No Power U-Com Failure Is voltage >3V? Change LDO IC Refer this list XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 27 TROUBLE SHOOTING FLOW 2-1. LED BLINKING 2X (MAIN POWER ERROR) (75” Model) (55”/65” Models) with G* board with AC-ADP 2-time blinking 2-time blinking Check +12V_REG Check +12V_REG at pin 11/13 of on B Board at pin 11/13 of on B Board (CN9000 BM1), (CN9000 BM1), Voltage >...

  • Page 28: Audio Error

    TROUBLE SHOOTING FLOW 2-2. LED BLINKING 3X 2-3. LED BLINKING 4X (LED VOLTAGE ERROR) DC_ALERT AUDIO ERROR LED 3x blinking 4-time blinking LED 3x blinking Check +5.0V_VBUS IC9014,etc at pin1 in IC8001, 4.959V See other flow Audio Error ? Check (B* Board) Between 0.898V to 2.997V <Voltage<5.285V?
  • Page 29 TROUBLE SHOOTING FLOW 2-4. LED BLINKING 5X (PANEL COMMUNICATION ERROR) 5-times blinking Check “+12.5V_TCON” at G-Board is Change Change Replace G-Board CN401 #4 (or C493) suspicious Panel (or T-con) on the DPS-Board Symptom Symptom improvement improvement Symptom improve Replace the Harness DPS is Panel (or T-Con) is Harness is...
  • Page 30 TROUBLE SHOOTING FLOW 2-5. LED BLINKING 6X (BACKLIGHT ERROR) 6-times blinking Harness / Voltage ≥ 1.85 V Connection Symptom Check Voltage of Check broken Improvement BL_ERR_DET Change harness/connection Harness on 21pin of CN401 harness G/LD* board to DPS Board on DPS improvement Symptom Harness /...
  • Page 31 TROUBLE SHOOTING FLOW 2-6. LED BLINKING 7X (TEMPERATURE ERROR) 7-time blinking Setting circumstance is OK? Set to another Temperature, location, etc. Ventilation, etc. Change B* Board, improvement and Aging a few Panel hours Symptom improvement Check I2C_C bus Temp sensor B* Board NG communication OK? IC1400...
  • Page 32 TROUBLE SHOOTING FLOW 3-1. NO SOUND No Sound Without LED 3x No sound only Go to Analog RF and Digital RF ? 3-6 No Sound Tuner Select [External Inputs] AV receiver is connected [BRAVIA Sync Settings] to HDMI in ? [BRAVIA Sync Control] [off] Go to...
  • Page 33 TROUBLE SHOOTING FLOW 3-2. NO SOUND (AUDIO) 3-3. NO SOUND (POWER OFF CHECK) No Sound Power Off Check Power Off Check Audio From 2-2 From 3-1 Measure the Speaker (1) B / DPS Board impedance by multi-meter Replace Speaker PVDD-GND short ? Less than 3Ω...
  • Page 34 TROUBLE SHOOTING FLOW 3-4. NO SOUND (POWER ON CHECK) Power On Check From 2-2 (4) POWER_AU check POWER_AU is supplied to B / DPS Board for a moment before LED 3x blinking ? Replace G Board BM1 Board OK ? (4) POWER_AU check Measure voltage between PVDD and GND at capacitor C7881.
  • Page 35 TROUBLE SHOOTING FLOW 3-5. NO SOUND (AUDIO HP/AUDIO OUT) No Sound Audio HP/Audio out [Sound] [Headphone] Headphone Volume [Headphone/Audio out] Increase Headphone Volume is set to MIN? is set to ? Replace B Board [Audio Out (Fixed)] Replace B Board [Audio Out (Variable)] Volume Increase Volume...
  • Page 36 TROUBLE SHOOTING FLOW 3-6. NO SOUND (TUNER) This troubleshooting is only for Analog No Sound with normal picture Only RF tuner input? Please refer Audio Check IC1000 (SOC) troubleshooting XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 37 TROUBLE SHOOTING FLOW 3-7. NO SOUND (HDMI1/2/3/4) No Sound Check the picture Refer to 4-5 HDMI NO PICTURE Does this model have Connect Stereo mini-jack cable between Source and the TV, and Check the mode Analog Audio In Change “HDMI/DVI Audio Source” to Auto or Analog Audio In. of Source equipment (Stereo mini-jack)? HDMI...
  • Page 38 TROUBLE SHOOTING FLOW 4-1. NO PICTURE BL_ON (L or H): IC9017 #18pin (for 4K BMFW2/BM1 board) No Picture BL_ON : H Check Smart Core Check Replace Got Any Normal Replace LCD Panel Behavior BL_ON the V by One FFC Display? the main Board (or T-CON) (5x Blinking)
  • Page 39 TROUBLE SHOOTING FLOW 4-2. NO PICTURE (VIDEO) (CH/MX/BR/PA/COL/LA) No Picture Video Video 1 Video 2 No Picture No Picture Check J7505 Check J7504 Check if input OSD Check if input OSD NG (Vpp: 0 V) NG (Vpp: 0 V) Connection, Connection, is GREY OUT is GREY OUT...
  • Page 40 TROUBLE SHOOTING FLOW 4-2. NO PICTURE (VIDEO) (UC/HK/TW) No Picture Video1 Video2 No Picture No Picture Check J7501 Check J7504 Check if input OSD Check if input OSD NG (Vpp: 0 V) NG (Vpp: 0 V) Connection, Connection, is GREY OUT is GREY OUT VIDEO2_DET VIDEO_DET...
  • Page 41 TROUBLE SHOOTING FLOW 4-3. NO PICTURE (COMPONENT) (CH/MX/BR/PA/COL/LA) No Picture Video Component No Picture Check J7504 Con Check if input OSD NG (Vpp: 0 V) VIDEO_DET at is GREY OUT R7539, OK if it is highlighted CR_DET at R7538 OK (Vpp: 3.3 V) Detailed check all parts NG (Vpp: 0 V) at VIDEO_DET signal...
  • Page 42 TROUBLE SHOOTING FLOW 4-3. NO PICTURE (COMPONENT) (UC/HK/TW) No Picture Component No Picture Check J7504 Con Check if input OSD NG (Vpp: 0 V) VIDEO_DET at is GREY OUT R7539, OK if it is highlighted CR_DET at R7538 OK (Vpp: 3.3 V) Detailed check all parts NG (Vpp: 0 V) at VIDEO_DET signal...
  • Page 43 TROUBLE SHOOTING FLOW 4-4. NO PICTURE (@ TUNER) RF input no picture / noisy picture Note: I2C line for all tuners except Japan_SKP - Parts for I2C_A_SDA line: R6001, C6004. Check RF source cable Change RF cable and antenna - Parts for I2C_A_SCL line: R6002, C6005. and antenna, OK? I2C line for Japan_SKP - Parts for I2C_D_SDA line: R6003,C6006...
  • Page 44 TROUBLE SHOOTING FLOW 4-4. NO PICTURE (@ TUNER) FOR ANALOG TUNING: @ All destination except JP For LA-ISDB(BR/AR), LA-T2(COL) and TW only Note: Analog Tuning - Parts for IFOUT_N line: R6007, FB6002, C6008, R6327, C6301, R6301. - Parts for IFOUT_P line: R6008, FB6003, C6009, R6326, C6300, R6300. For Other destination - Parts for IFAGC line: R6072, R6009, R6010, R6069, C6302, R6303.
  • Page 45 TROUBLE SHOOTING FLOW 4-4. NO PICTURE (@ TUNER) FOR DIGITAL TUNING 1: @ TW, NA-ATSC(MX/UC), JP_SKP and LA-T2(COL) Digital Tuning 1 For TW only Note: - Parts for IFOUT_N line: R6007, FB6002, C6008, R6327, C6301, R6301. - Parts for IFOUT_P line: R6008, FB6003, C6009, R6326, C6300, R6300. - Parts for IFAGC line: R6072, R6009, R6010, R6069, C6302, R6303.
  • Page 46 TROUBLE SHOOTING FLOW 4-4. NO PICTURE (@ TUNER) FOR DIGITAL TUNING 2: @ AEP_W, JP_SKP, PA_T2, CH/HK, LA-ISDB(BR/AR) and LA-T2(COL) Digital Tuning 2 For LA-ISDB(BR) and LA-T2(COL) only For JP_SKP For AEP-W For PA_T2 and CH/HK only Confirm ANT or Cable connection Confirm ANT or Satellite connection Confirm ANT or Satellite connection BS/CS or SKP_Opticast/...
  • Page 47 TROUBLE SHOOTING FLOW 4-5. NO PICTURE (HDMI) (1) HDMI1 No Picture Check the below point at All lines are NG Connector side Other Input is OK Check other - Check +5V line Replace HDMI input - Check HPD line CN5201 - Check DDC lines All Inputs are NG Voltage NG...
  • Page 48 TROUBLE SHOOTING FLOW 4-5. NO PICTURE (HDMI) (2) HDMI2 No Picture Check the below point at All lines are NG Connector side Other Input is OK Check other - Check +5V line Replace HDMI input - Check HPD line CN5202 - Check DDC lines All Inputs are NG Voltage NG...
  • Page 49 TROUBLE SHOOTING FLOW 4-5. NO PICTURE (HDMI) (3) HDMI3 No Picture Check the below point at All lines are NG Connector side Other Input is OK - Check +5V line Check other Replace HDMI input - Check HPD line CN5203 - Check DDC lines All Inputs are NG Voltage NG...
  • Page 50 TROUBLE SHOOTING FLOW 4-5. NO PICTURE (HDMI) (4) HDMI4 No Picture Check the below point at All lines are NG Connector side Other Input is OK Check other - Check +5V line Replace HDMI input - Check HPD line CN5208 - Check DDC lines All Inputs are NG Voltage NG...
  • Page 51 TROUBLE SHOOTING FLOW 5. KEY SWITCH BUTTONS ERROR Check harness connection Side key buttons error between B-board and Harness connection issue switch module Change harness between B-board to switch module B-board to switch module harness issue harness Change switch module Switch module issue Check resistor value on B- Resistor value...
  • Page 52 TROUBLE SHOOTING FLOW 6. IR REMOTE COMMANDER ERROR Center white LED blinks Battery of remote commander IR remote commander does not when pushing buttons of could be weak. remote commander at close respond Change battery. to IR sensor. Check harness connection Harness connection between B-board and issue...

  • Page 53: Light Sensor Error

    TROUBLE SHOOTING FLOW 7. LIGHT SENSOR ERROR Setting is “ON” Check UI setting and Check harness Battery of remote commander Backlight level does not change when ambient light make sure light sensor connection between B- could be weak. setting is “ON” changed board and SmartCore Change battery.
  • Page 54 TROUBLE SHOOTING FLOW 8. NETWORK MALFUNCTION (1) Ethernet (Wired) [Network Set-up] >[Wired Set-up] on the TV Connection Results Connection Results Connection Results B board Cable Connection Local Access Internet Access Failed Failed Failed Auto Check Proxy setting B board Wired Set-up Check cable Local router CN8003...
  • Page 55 TROUBLE SHOOTING FLOW 8. NETWORK MALFUNCTION (2) Internal Wireless Network malfunction Wireless Network Is the radio field on the TV Bxx Board Strength too weak or even No signal? Error Message appear when the Wireless Network is selected? Change WiFi module Access Point Hardware defect suspected.

  • Page 56: Bluetooth Malfunction

    TROUBLE SHOOTING FLOW 9. BLUETOOTH MALFUNCTION Touch pad Remote doesn’t work 3D-glasses (Active) doesn’t work Bluetooth Speaker/Headphone/Headset doesn’t work Please refer Touch pad Remote manual Home > Settings > Check BT antenna 3D-glasses (Active) manual Bluetooth Settings Connection is OK Can read Bluetooth Speaker/Headphone/Headset operation manual Near discoverable...
  • Page 57 TROUBLE SHOOTING PCB PARTS MAP BM1 (A side view) cam008 cam203 cam007 cam013 cam012 cam009 cam010 cam011 CN5201 CN7703 J7700 J1401 J7505 CN8002 CN8000 CN8005 CL1403 cam104 cam211 R1516 CN8003 IC1407 cam102 R1447 R1449 cam086 CL5222 VD5201 R5523 RB5231 RB5232 R7561 R1513 R1515...
  • Page 58 TROUBLE SHOOTING PCB PARTS MAP BM1 (B side view) KJ004 KJ003 cam012 cam011 cam202 JL7865 JL7869 JL7870 JL7872 JL7878 KB001 IRM003 JL7863 JL7862 JL6029 JL7841 JL7843 JL7845 JL7853 JL7860 JL7840 JL7857 JL7838 JL7877 JL7856 JL7847 JL8705 JL9009 JL7861 JL5212 JL8702 JL6005 JL7835 JL7839...
  • Page 59 TROUBLE SHOOTING PCB PARTS MAP DPS (A side view) cam10014 cam10014 cam015 cam006 cam015 cam006 cam12 cam036 cam004 cam12 cam036 cam004 cam003 cam001 R474 C471 R470 R474 C471 R470 D401 cam005 D401 cam22 R469 cam22 R469 R3622 R3623 R3312 R8713 R473 C472 R471...
  • Page 60 TROUBLE SHOOTING PCB PARTS MAP DPS (B side view) KJ004 KJ003 cam008 KB001 JL7703 JL7703 IRM003 JL3602 JL3602 JL7700 JL7700 JL7707 JL7707 JL7701 JL7702 JL3600 JL7701 JL7702 JL3600 JL7704 JL7705 JL7706 JL201 JL202 JL203 JL204 JL205 JL206 JL7704 JL7705 JL7706 JL201 JL202 JL203...
  • Page 61 DIAGRAMS BLOCK DIAGRAM (Common for all inches) XBR-55/65X930D, 65X935D/937D, 75X940D...

  • Page 62: Connector Diagram

    DIAGRAMS CONNECTOR DIAGRAM 1. XBR-55X930D BAX_F T-con CN8701 CN8700 CN3601 To BMFW CN203 Board 1-798-510-31 HUS_GND VBTX11P VBTX11P VBTX7P RxP7 VBTX7N RxN7 HUS_KEY_AD VBTX11N VBTX11N HUS_POWER_KEY VBTX6P RxP6 PANEL FFC 1-822-693-11 1-821-900-11 VBTX10P VBTX10P JAM SZ15-03WLR VBTX10N VBTX10N VBTX6N RxN6...
  • Page 63 DIAGRAMS CONNECTOR DIAGRAM 2. XBR-65X930D/935D/937D BAX_F BAX_F T-con CN8701 CN8700 CN3601 To BMFW CN203 Board 1-798-510-31 HUS_GND VBTX11P VBTX11P VBTX7P RxP7 VBTX7N RxN7 HUS_KEY_AD VBTX11N VBTX11N HUS_POWER_KEY VBTX6P RxP6 PANEL FFC 1-822-693-11 1-821-900-11 VBTX10P VBTX10P JAM SZ15-03WLR VBTX10N VBTX10N VBTX6N RxN6 VBTX9P VBTX9P...
  • Page 64 DIAGRAMS CONNECTOR DIAGRAM BAX_F T-con CN8 7 0 1 CN8 7 0 0 CN3 6 0 1 To BMFW CN2 0 3 Board 1-798-510-31 HUS_GND # 3 0 VBTX11P VBTX11P VBTX7P RxP7 HUS_KEY_AD # 3 0 VBTX11N VBTX11N VBTX7N RxN7 HUS_POWER_KEY # 3 0 1-822-693-11...
  • Page 65 DIAGRAMS BOARDS LOCATION XBR-55X930D XBR-65X930D/935D/937D SMART CORE (S) SWITCH UNIT SMART CORE (S) SWITCH UNIT XBR-75X940D SMART CORE (S) SMART CORE (M) WLAN/BT MODULE(11AC) WLAN / BT MODULE(11AC) HSC4-S HSC4-M SWITCH UNIT SMART CORE (M) XBR-55/65X930D, 65X935D/937D, 75X940D...

  • Page 66: Wire Dressing

    WIRE DRESSING Overview XBR-55X930D XBR-65X930D/935D/937D VA Tape VA Tape ・Fix wire ・Fix wire Harness Tie x3 Harness Tie x4 • Fix wire • Fix wire Slide Clamp x2 Slide Clamp x1 • Hold wires • Hold wires XBR-75X940D VA Tape ・Fix wire...
  • Page 67 PANEL HANDLING ON WORKING TABLE (55”/65”) *TV set handling is same as Panel basically. XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 68 PANEL HANDLING ON WORKING TABLE (75”) *TV set handling is same as Panel basically. XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 69 PANEL HANDLING LIFTING UP (55”/65”) *TV set handling is same as Panel basically. Shift the panel to hold Bottom side Hold Bottom side (Don’t slip the panel) Lift up Top side Flip up to vertical position Recommended holding position (Refer to following pages for detail) XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 70 PANEL HANDLING LIFTING UP (75”) *TV set handling is same as Panel basically. XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 71 PANEL HANDLING HOLDING ON HORIZONTAL POSITION (55”/65”) *TV set handling is same as Panel basically. XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 72 PANEL HANDLING HOLDING ON HORIZONTAL POSITION (75”) *TV set handling is same as Panel basically. XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 73 PANEL HANDLING HOLDING ON VERTICAL POSITION & MOVING (55”/65”) *TV set handling is same as Panel basically. XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 74 PANEL HANDLING HOLDING ON VERTICAL POSITION & MOVING (75”) *TV set handling is same as Panel basically. XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 75 PANEL HANDLING HOLDING ON VERTICAL POSITION & MOVING (TV set only) (55”/65”) XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 76 PANEL HANDLING HOLDING ON VERTICAL POSITION & MOVING (TV set only) (75”) XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 77 PANEL HANDLING BACK UP (55”/65”) *TV set handling is same as Panel basically. XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 78 PANEL HANDLING HOW TO TAKE OUT PANEL FROM SERVICE PACKAGE (75”) XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 79 DISASSEMBLY • There are clutch in the yellow frame[ ]. Therefore please be careful in the case of the disassembly or assembly of parts. 1. XBR-55X930D 1-1. STAND CENTER COVER 4 Screws (SCREW, +PSW M5 X12) P/N: 2-580-607-01 STAND COVER...
  • Page 80 DISASSEMBLY 1. XBR-55X930D 1-2. LABEL, REAR TERMINAL (GNT) AND LABEL, DC IN (GNT) LABEL, REAR TERMINAL (GNT) LABEL, DC IN (GNT) XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 81 DISASSEMBLY 1. XBR-55X930D 1-3. CLAMPE, CABLE (GNT L) CLAMPE, CABLE (GNT L) CLAMPE, CABLE (GNT L) XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 82 DISASSEMBLY 1. XBR-55X930D 1-4. COVER, SIDE (GNT) AND SCREW CAP (GNT) COVER, SIDE (GNT) SCREW CAP (GNT) XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 83 DISASSEMBLY 1. XBR-55X930D Note: 1-5. REAR COVER (L GNT) A Before taking off Rear Cover, you have to slide BRACKET-SLIDE of both sides to the upside. Please refer to Appendix-1. 4 screws (SCREW, ORNAMENTAL M6X12) P/N: 4-268-126-02 2 screws (JOINT, SCREW) P/N: 4-400-043-11...
  • Page 84 DISASSEMBLY 1. XBR-55X930D 1-5. REAR COVER (L GNT) A REAR COVER (L GNT) A Note for the location of the smart core when assembling the R/C. Note: Check the hook has not broken after taking off Rear Cover. XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 85 DISASSEMBLY 1. XBR-55X930D 1-6. CATCHER CATCHER XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 86 DISASSEMBLY 1. XBR-55X930D 1-7. COVER, UNDER (GNT) A AND BRACKET, DC JACK (GNT) COVER, UNDER (GNT) A BRACKET, DC JACK (GNT) XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 87 DISASSEMBLY 1. XBR-55X930D 1-8. TAPE TAPE TAPE TAPE TAPE TAPE XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 88 DISASSEMBLY 1. XBR-55X930D 1-9. SP-BOX ASSY (W12-L CH-ND) SP-BOX ASSY (W12-L CH-ND) XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 89 DISASSEMBLY 1. XBR-55X930D 1-10. TAPE AND WIRE DRESSING TAPE TAPE TAPE XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 90 DISASSEMBLY 1. XBR-55X930D 1-11. TAPE TAPE TAPE TAPE TAPE XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 91 DISASSEMBLY 1. XBR-55X930D 1-12. SP-BOX ASSY (W12-R CH-ND) SP-BOX ASSY (W12-R CH-ND) XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 92 DISASSEMBLY 1. XBR-55X930D 1-13. TAPE AND BT ANTENNA TAPE TAPE TAPE BT ANTENNA Screw (SCREW, +PSW M3X6) P/N: 4-472-518-11 XBR-55/65X930D, 65X935D/937D, 75X940D...

  • Page 93: Wire Dressing

    DISASSEMBLY 1. XBR-55X930D 1-14. WIRE DRESSING XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 94 DISASSEMBLY 1. XBR-55X930D NOTE: 1-15. SMART CORE (S) Don’t scratch Ornament panel with Bezel while installing. For This For This Model Model HARNESS ASSY (MAIN) SMART CORE (S) XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 95 DISASSEMBLY 1. XBR-55X930D 1-16. TSI AND BRACKET, TS Screw (SCREW, +PSW M3X6) P/N: 4-472-518-11 BRACKET, TS Screw (SCREW, +PSW M3X6) P/N: 4-472-518-11 XBR-55/65X930D, 65X935D/937D, 75X940D...

  • Page 96: Switch Unit

    DISASSEMBLY 1. XBR-55X930D 1-17. SWITCH UNIT SWITCH UNIT HARNESS ASSY (MAIN) XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 97 DISASSEMBLY 1. XBR-55X930D 1-18. HARNESS ASSY (MAIN) AND HOLDER SIDE SW (GNT L M1) Screw (SCREW, +LH M3X2.1 STEP (GNT)) P/N: 4-586-665-01 HARNESS ASSY (MAIN) P/N: 1-910-111-07 HOLDER SIDE SW (GNT L M1) XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 98 DISASSEMBLY 1. XBR-55X930D 1-19. TAPE AND CONNECTOR ASSY 10P TAPE CONNECTOR ASSY 10P P/N: 1-910-111-21 XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 99 DISASSEMBLY 1. XBR-55X930D 1-20. TAPE AND CONNECTOR ASSY 30P TAPE TAPE CONNECTOR ASSY 30P P/N: 1-910-111-08 XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 100 DISASSEMBLY 1. XBR-55X930D 1-21. TAPE AND FLEXIBLE FLAT CABLE 30P TAPE TAPE FLEXIBLE FLAT CABLE 30P P/N: 1-910-111-05 XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 101 DISASSEMBLY 1. XBR-55X930D 1-22. FLEXIBLE FLAT CABLE 51P AND FLEXIBLE FLAT CABLE 41P FLEXIBLE FLAT CABLE 51P P/N: 1-849-325-11 FLEXIBLE FLAT CABLE 41P P/N: 1-849-319-11 XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 102 DISASSEMBLY 1. XBR-55X930D 1-23. TAPE TAPE TAPE TAPE TAPE XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 103 DISASSEMBLY 1. XBR-55X930D 1-24. FLEXIBLE FLAT CABLE 30P(BD) AND FLEXIBLE FLAT CABLE 51P FLEXIBLE FLAT CABLE 30P (BD) P/N: 1-910-111-06 FLEXIBLE FLAT CABLE 51P P/N: 1-849-326-11 XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 104 DISASSEMBLY 1. XBR-55X930D 1-25. TAPE AND CONNECTOR ASSY 20P TAPE CONNECTOR ASSY 20P P/N: 1-910-111-09 XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 105 DISASSEMBLY 1. XBR-55X930D 1-26. BRACKET, SLIDE (L) (L GNT) 3 screws (SCREW, +LH M3X2.1 STEP (GNT)) P/N: 4-586-665-01 BRACKET, SLIDE (L) (L GNT) XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 106 DISASSEMBLY 1. XBR-55X930D 1-27. BRACKET, SLIDE (R) (L GNT) 3 screws (SCREW, +LH M3X2.1 STEP (GNT)) P/N: 4-586-665-01 BRACKET, SLIDE (R) (L GNT) XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 107 DISASSEMBLY 1. XBR-55X930D 1-28. TOP COVER (L GNT) 7 screws (SCREW, +PSW M3X6) P/N: 4-472-518-11 TOP COVER (L GNT) XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 108 DISASSEMBLY 1. XBR-55X930D 1-29. SLIDE, CLAMP AND BRACKET, INSIDE (GNT) SLIDE, CLAMP SLIDE, CLAMP BRACKET, INSIDE (GNT) XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 109 DISASSEMBLY 1. XBR-55X930D 1-30. BRACKET, SIDE (GNT) BRACKET, SIDE (GNT) XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 110 DISASSEMBLY 1. XBR-55X930D 1-31. BRACKET, TOP (GNT) BRACKET, TOP (GNT) XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 111 DISASSEMBLY 1. XBR-55X930D 1-32. BM1 8 screws (SCREW, +PSW M3X6) P/N: 4-472-518-11 XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 112 DISASSEMBLY 1. XBR-55X930D 1-33. LABEL, INSIDE TERMINAL (GNT) AND LABEL, SIDE TERMINAL (GNT) When you do panel replacement, When you do panel replacement, please also replace this part at the same time to a new one. please also replace this part at the same time to a new one.
  • Page 113 DISASSEMBLY 1. XBR-55X930D 1-34. SHEET, THERMAL(BM) SHEET, THERMAL(BM) XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 114 DISASSEMBLY 1. XBR-55X930D 1-35. CUSHION(GNT LD) AND J CUSHION(GNT LD) 3 screws (SCREW, +PSW M3X6) P/N: 4-472-518-11 XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 115 DISASSEMBLY 1. XBR-55X930D 1-36. DPS AND SHEET, THERMAL (BAF) 4 screws (SCREW, +PSW M3X6) P/N: 4-472-518-11 SHEET, THERMAL (BAF) XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 116 DISASSEMBLY 1. XBR-55X930D 1-37. CUSHION, AL SP (GNT) CUSHION, AL SP (GNT) CUSHION, AL SP (GNT) XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 117 DISASSEMBLY 1. XBR-55X930D 1-38. BRACKET, HOOK (L) (GNT) AND BRACKET, HOOK (R) (GNT) Screw (SCREW, +PSW M3X6) P/N: 4-472-518-11 Screw (SCREW, +PSW M3X6) P/N: 4-472-518-11 BRACKET, HOOK (L) (GNT) BRACKET, HOOK (R) (GNT) XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 118 DISASSEMBLY 1. XBR-55X930D 1-39. AL TAPE, BT ANT (GNT L) AND AL TAPE, PWB LS (GNT) AND LCD PANEL AL TAPE, BT ANT (GNT L) AL TAPE, PWB LS (GNT) LCD PANEL XBR-55/65X930D, 65X935D/937D, 75X940D...

  • Page 119: Center Cover

    DISASSEMBLY 2. XBR-65X930D/935D/937D 2-1. STAND CENTER COVER 4 Screws (SCREW, +PSW M5 X12) P/N: 2-580-607-01 STAND COVER STAND NECK STAND BASE 4 Screws (SCREW, +PSW M5 X12) P/N: 2-580-607-01 XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 120 DISASSEMBLY 2. XBR-65X930D/935D/937D 2-2. LABEL, REAR TERMINAL (GNT) AND LABEL, DC IN (GNT) LABEL, REAR TERMINAL (GNT) LABEL, DC IN (GNT) XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 121 DISASSEMBLY 2. XBR-65X930D/935D/937D 2-3. CLAMP, CABLE (GNT L) CLAMP, CABLE (GNT L) CLAMP, CABLE ( GNT L) XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 122 DISASSEMBLY 2. XBR-65X930D/935D/937D 2-4. COVER, SIDE (GNT) AND SCREW CAP (GNT) COVER, SIDE (GNT) SCREW CAP (GNT) XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 123 DISASSEMBLY 2. XBR-65X930D/935D/937D Note: 2-5. REAR COVER (2L GNT) A Before taking off Rear Cover, you have to slide BRACKET-SLIDE of both sides to the upside. Please refer to Appendix-1. 4 screws (SCREW, ORNAMENTAL M6X12) P/N: 4-268-126-02 2 screws (JOINT, SCREW) P/N: 4-400-043-11 2 screws (SCREW +BVTP 3X10 TYPE2 IT-3) P/N: 7-685-647-79 15 screws (SCREW , +PWH M3X6) P/N: 4-452-935-01 XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 124 DISASSEMBLY 2. XBR-65X930D/935D/937D 2-5. REAR COVER (2L GNT) A REAR COVER (2L GNT) A Note for the location of the smart core when assembling the R/C. Note: Check the hook has not broken after taking off Rear Cover. XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 125 DISASSEMBLY 2. XBR-65X930D/935D/937D 2-6. CATCHER CATCHER XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 126 DISASSEMBLY 2. XBR-65X930D/935D/937D 2-7. COVER, UNDER (GNT) A AND BRACKET, DC JACK (GNT) COVER, UNDER (GNT) A BRACKET, DC JACK( GNT) XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 127 DISASSEMBLY 2. XBR-65X930D/935D/937D 2-8. TAPE TAPE TAPE TAPE XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 128 DISASSEMBLY 2. XBR-65X930D/935D/937D 2-9. SP-BOX ASSY (W12-L CH-ND) SP-BOX ASSY (W12-L CH-ND) XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 129 DISASSEMBLY 2. XBR-65X930D/935D/937D 2-10. TAPE TAPE TAPE TAPE TAPE XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 130 DISASSEMBLY 2. XBR-65X930D/935D/937D 2-11. TAPE TAPE TAPE TAPE TAPE XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 131 DISASSEMBLY 2. XBR-65X930D/935D/937D 2-12. TAPE AND WIRE DRESSING TAPE TAPE XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 132 DISASSEMBLY 2. XBR-65X930D/935D/937D 2-13. TAPE TAPE TAPE TAPE TAPE XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 133 DISASSEMBLY 2. XBR-65X930D/935D/937D 2-14. SP-BOX ASSY(W12-R CH-ND) SP-BOX ASSY (W12-R CH-ND) XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 134 DISASSEMBLY 2. XBR-65X930D/935D/937D 2-15. TAPE TAPE TAPE TAPE XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 135 DISASSEMBLY 2. XBR-65X930D/935D/937D 2-16. BT ANTENNA BT ANTENNA Screw (SCREW, +PSW M3X6) P/N: 4-472-518-11 XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 136 DISASSEMBLY 2. XBR-65X930D/935D/937D 2-17. TAPE AND WIRE DRESSING TAPE XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 137 DISASSEMBLY 2. XBR-65X930D/935D/937D NOTE: 2-18. SMART CORE (S) For This For This Model Model HARNESS ASSY (MAIN) SMART CORE (S) XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 138 DISASSEMBLY 2. XBR-65X930D/935D/937D 2-19. TSI AND BRACKET, TS Screw (SCREW, +PSW M3X6) P/N: 4-472-518-11 BRACKET, TS Screw (SCREW, +PSW M3X6) P/N: 4-472-518-11 XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 139 DISASSEMBLY 2. XBR-65X930D/935D/937D 2-20. SWITCH UNIT SWITCH UNIT HARNESS ASSY (MAIN) XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 140 DISASSEMBLY 2. XBR-65X930D/935D/937D 2-21. HARNESS ASSY (MAIN) AND HOLDER SIDE SW (GNT L M1) Screw (SCREW, +LH M3X2.1 STEP (GNT)) P/N: 4-586-665-01 HARNESS ASSY (MAIN) P/N: 1-910-111-12 HOLDER SIDE SW (GNT L M1) XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 141 DISASSEMBLY 2. XBR-65X930D/935D/937D 2-22. TAPE AND CONNECTOR ASSY 10P TAPE CONNECTOR ASSY 10P P/N: 1-910-111-21 XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 142 DISASSEMBLY 2. XBR-65X930D/935D/937D 2-23. TAPE AND CONNECTOR ASSY 30P TAPE TAPE CONNECTOR ASSY 30P P/N: 1-910-111-08 XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 143 DISASSEMBLY 2. XBR-65X930D/935D/937D 2-24. TAPE AND FLEXIBLE FLAT CABLE 30P TAPE TAPE TAPE FLEXIBLE FLAT CABLE 30P P/N: 1-910-111-10 XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 144 DISASSEMBLY 2. XBR-65X930D/935D/937D 2-25. FLEXIBLE FLAT CABLE 51P AND FLEXIBLE FLAT CABLE 41P FLEXIBLE FLAT CABLE 51P P/N: 1-849-323-11 FLEXIBLE FLAT CABLE 41P P/N: 1-849-324-11 XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 145 DISASSEMBLY 2. XBR-65X930D/935D/937D 2-26. TAPE TAPE TAPE TAPE TAPE XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 146 DISASSEMBLY 2. XBR-65X930D/935D/937D 2-27. FLEXIBLE FLAT CABLE 30P(BD) AND FLEXIBLE FLAT CABLE 51P FLEXIBLE FLAT CABLE 30P(BD) P/N: 1-910-111-11 FLEXIBLE FLAT CABLE 51P P/N: 1-849-320-11 XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 147 DISASSEMBLY 2. XBR-65X930D/935D/937D 2-28. TAPE AND CONNECTOR ASSY 20P TAPE TAPE CONNECTOR ASSY 20P P/N: 1-910-111-14 XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 148 DISASSEMBLY 2. XBR-65X930D/935D/937D 2-29. BRACKET, SLIDE (L) (2L GNT) 3 screws (SCREW, +LH M3X2.1 STEP (GNT)) P/N: 4-586-665-01 BRACKET, SLIDE (L) (2L GNT) XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 149 DISASSEMBLY 2. XBR-65X930D/935D/937D 2-30. BRACKET, SLIDE (R) (2L GNT) 3 screws (SCREW, +LH M3X2.1 STEP (GNT)) P/N: 4-586-665-01 BRACKET, SLIDE (R) (2L GNT) XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 150 DISASSEMBLY 2. XBR-65X930D/935D/937D 2-31. TOP COVER (2L GNT) 7 screws (SCREW, +PSW M3X6) P/N: 4-472-518-11 TOP COVER (2L GNT) XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 151 DISASSEMBLY 2. XBR-65X930D/935D/937D 2-32. SLIDE, CLAMP AND BRACKET, INSIDE (GNT) SLIDE, CLAMP BRACKET, INSIDE (GNT) XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 152 DISASSEMBLY 2. XBR-65X930D/935D/937D 2-33. BRACKET, SIDE (GNT) BRACKET, SIDE (GNT) XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 153 DISASSEMBLY 2. XBR-65X930D/935D/937D 2-34. BRACKET, TOP (GNT) BRACKET, TOP (GNT) XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 154 DISASSEMBLY 2. XBR-65X930D/935D/937D 2-35. BM1 8 screws (SCREW, +PSW M3X6) P/N: 4-472-518-11 XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 155 DISASSEMBLY 2. XBR-65X930D/935D/937D 2-36. LABEL, INSIDE TERMINAL (GNT) AND LABEL, SIDE TERMINAL (GNT) When you do panel replacement, When you do panel replacement, please also replace this part at the same time to a new one. please also replace this part at the same time to a new one. LABEL, SIDE TERMINAL (GNT) LABEL, INSIDE TERMINAL (GNT) Caution: Don’t damage to LABEL.
  • Page 156 DISASSEMBLY 2. XBR-65X930D/935D/937D 2-37. SHEET, THERMAL(BM) AND PLATE, MAIN S (GNT L) SHEET, THERMAL(BM) PLATE, MAIN S (GNT L) 2 screws (SCREW, +LH M3X3 (CRN)) P/N: 4-549-168-01 Note: Screw for securing “PLATE, MAIN S (GNT)” is Low Head Type. And it has a “Cross Recess #1”. So, please prepare #1 bit Screw Driver for this operation.
  • Page 157 DISASSEMBLY 2. XBR-65X930D/935D/937D 2-38. CUSHION (GNT LD) AND J CUSHION (GNT LD) 3 screws (SCREW, +PSW M3X6) P/N: 4-472-518-11 XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 158 DISASSEMBLY 2. XBR-65X930D/935D/937D 2-39. DPS AND SHEET, THERMAL (BAF) 4 screws (SCREW, +PSW M3X6) P/N: 4-472-518-11 SHEET, THERMAL (BAF) XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 159 DISASSEMBLY 2. XBR-65X930D/935D/937D 2-40. GASKET(SP GNT) AND CUSHION, AL SP (GNT) GASKET(SP GNT) CUSHION, AL SP (GNT) CUSHION, AL SP (GNT) XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 160 DISASSEMBLY 2. XBR-65X930D/935D/937D 2-41. BRACKET, HOOK (L) (GNT) AND BRACKET, HOOK (R) (GNT) Screw (SCREW, +PSW M3X6) P/N: 4-472-518-11 Screw (SCREW, +PSW M3X6) P/N: 4-472-518-11 BRACKET, HOOK (L) (GNT) BRACKET, HOOK (R) (GNT) XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 161 DISASSEMBLY 2. XBR-65X930D/935D/937D 2-42. AL TAPE, PWB LS (GNT) AND LCD PANEL AL TAPE, PWB LS (GNT) LCD PANEL XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 162 DISASSEMBLY 3. SMART CORE (S) 3-1. BRACKET, WIFI ASSY BRACKET, WIFI ASSY XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 163 DISASSEMBLY 3. SMART CORE (S) 3-2. WLAN / BT MODULE(11AC) AND BRACKET, WIFI NOTE: BRACKET, WIFI NOTE: For This Model WLAN / BT MODULE(11AC) XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 164 DISASSEMBLY 3. SMART CORE (S) 3-3. SHEET, IR NOISE AND COVER, TOP When you do TOP COVER replacement, please also replace this part at the same time to a new one. SHEET, IR NOISE P/N: 4-590-730-01 60 x 13 (t0.2) Datum: edge of cover top Datum: edge of cover top hole COVER, TOP...
  • Page 165 DISASSEMBLY 3. SMART CORE (S) 3-4. HSC4-S NOTE: HSC4-S XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 166 DISASSEMBLY 3. SMART CORE (S) 3-5. PANEL, ORNAMENT PANEL, ORNAMENT Sequence Information XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 167 DISASSEMBLY 3. SMART CORE (S) 3-6. GUIDE, LIGHT AND CASE, BTM (S) GUIDE, LIGHT CASE, BTM (S) XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 168 DISASSEMBLY 4. XBR-75X940D 4-1. STAND CENTER COVER 4 Screws (SCREW, +PSW M5 X12) P/N: 2-580-607-01 STAND COVER STAND NECK STAND BASE 4 Screws (SCREW, +PSW M5 X12) P/N: 2-580-607-01 XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 169 DISASSEMBLY 4. XBR-75X940D 4-2. CLAMP, CABLE (GNT S) CLAMP, CABLE(GNT S) CLAMP, CABLE(GNT S) XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 170 DISASSEMBLY 4. XBR-75X940D 4-3. CLAMP, CABLE (GNT L) CLAMP, CABLE(GNT L) CLAMP, CABLE(GNT L) XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 171 DISASSEMBLY 4. XBR-75X940D 4-4. LABEL, REAR TERMINAL (GNT) AND COVER, SIDE (3L GNT) LABEL, REAR TERMINAL (GNT) COVER, SIDE (3L GNT) XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 172 DISASSEMBLY 4. XBR-75X940D 4-5. LABEL, INSIDE TERMINAL(PDT 3L) AND LABEL, SIDE TERMINAL(PDT 3L) NOTE: NOTE: LABEL, SIDE TERMINAL(PDT 3L) LABEL, INSIDE TERMINAL(PDT 3L) XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 173 DISASSEMBLY 4. XBR-75X940D 4-6. SCREW CAP (GNT) AND AC COVER (GNT 3L) Screw (SCREW , +PWH M3X6) P/N: 4-452-935-01 SCREW CAP (GNT) AC COVER (GNT 3L) XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 174 DISASSEMBLY 4. XBR-75X940D 4-7. POWER-SUPPLY CORD (WITH CONN.) POWER-SUPPLY CORD (WITH CONN.) XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 175 DISASSEMBLY 4. XBR-75X940D Note: 4-8. REAR COVER (3L GNT) A Before taking off Rear Cover, you have to slide BRACKET-SLIDE of both sides to the bottom side. 13 screws (SCREW , +PWH M3X6) P/N: 4-452-935-01 4screws (SCREW, +PSW M6X12) P/N: 4-567-081-01 2 screws (JOINT, SCREW) P/N: 4-400-043-11 6 screws (SCREW +BVTP 3X10 TYPE2 IT-3) P/N: 7-685-647-79 REAR COVER (3L GNT) A...
  • Page 176 DISASSEMBLY 4. XBR-75X940D 4-8. REAR COVER (3L GNT) A NOTES: When re-assembling REAR COVER (3L GNT) A XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 177 DISASSEMBLY 4. XBR-75X940D 4-9. UNDER COVER (3L GNT) A NOTE: When re-assembling UNDER COVER (3L GNT) A UNDER COVER (3L GNT) A XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 178 DISASSEMBLY 4. XBR-75X940D 4-10. TAPE TAPE TAPE TAPE TAPE XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 179 DISASSEMBLY 4. XBR-75X940D 4-11. TAPE TAPE TAPE TAPE TAPE XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 180 DISASSEMBLY 4. XBR-75X940D 4-12. TAPE TAPE TAPE TAPE TAPE XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 181 DISASSEMBLY 4. XBR-75X940D 4-13. SP-BOX ASSY(D20-WF RCH CH-ND) SP-BOX ASSY(D20-WF RCH CH-ND) Screw (SCREW, +PSW M3X6 W12) P/N: 4-256-393-12 XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 182 DISASSEMBLY 4. XBR-75X940D 4-14. SP-BOX ASSY(D20-WF LCH CH-ND) SP-BOX ASSY(D20-WF LCH CH-ND) Screw (SCREW, +PSW M3X6 W12) P/N: 4-256-393-12 XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 183 DISASSEMBLY 4. XBR-75X940D 4-15. TAPE AND WIRE DRESSING TAPE XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 184 DISASSEMBLY 4. XBR-75X940D 4-16. SP-BOX ASSY(W20-SQ RCH CH-ND) SP-BOX ASSY(W20-SQ RCH CH-ND) Screw (SCREW, +PSW M3X6 W12) P/N: 4-256-393-12 XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 185 DISASSEMBLY 4. XBR-75X940D 4-17. SP-BOX ASSY(W20-SQ LCH CH-ND) SP-BOX ASSY(W20-SQ LCH CH-ND) Screw (SCREW, +PSW M3X6 W12) P/N: 4-256-393-12 XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 186 DISASSEMBLY 4. XBR-75X940D 4-18. BT ANTENNA BT ANTENNA Screw (SCREW, +PSW M3X6) P/N: 4-472-518-11 XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 187 DISASSEMBLY 4. XBR-75X940D 4-19. WIRE DRESSING XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 188 DISASSEMBLY 4. XBR-75X940D 4-20. SMART CORE (M) NOTES: For This Model SMART CORE (M) XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 189 DISASSEMBLY 4. XBR-75X940D 4-21. TSI AND BRACKET, TS Screw (SCREW, +PSW M3X6) P/N: 4-472-518-11 BRACKET, TS Screw (SCREW, +PSW M3X6) P/N: 4-472-518-11 XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 190 DISASSEMBLY 4. XBR-75X940D 4-22. SWITCH UNIT (VM-WW) SWITCH UNIT (VM-WW) XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 191 DISASSEMBLY 4. XBR-75X940D 4-23. CONNECTOR ASSY 30P AND HOLDER SIDE SW(GNT 3L M1) Screw (SCREW, +LH M3X2.1 STEP (GNT)) P/N: 4-586-665-01 CONNECTOR ASSY 30P P/N: 1-910-111-20 HOLDER SIDE SW(GNT 3L M1) XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 192 DISASSEMBLY 4. XBR-75X940D 4-24. TAPE TAPE TAPE TAPE TAPE XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 193 DISASSEMBLY 4. XBR-75X940D NOTE: 4-25. WIRE DRESSING XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 194 DISASSEMBLY 4. XBR-75X940D 4-26. HARNESS ASSY(GDLD) HARNESS ASSY(GDLD) P/N: 1-910-111-18 XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 195 DISASSEMBLY 4. XBR-75X940D 4-27. WIRE DRESSING XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 196 DISASSEMBLY 4. XBR-75X940D 4-28. HARNESS ASSY (MAIN) HARNESS ASSY (MAIN) P/N: 1-910-111-17 XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 197 DISASSEMBLY 4. XBR-75X940D 4-29. WIRE DRESSING AND CONNECTOR ASSY 3P CONNECTOR ASSY 3P P/N: 1-849-358-11 XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 198 DISASSEMBLY 4. XBR-75X940D 4-30. TAPE AND FLEXIBLE FLAT CABLE 41P TAPE TAPE TAPE TAPE FLEXIBLE FLAT CABLE 41P P/N: 1-849-349-11 XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 199 DISASSEMBLY 4. XBR-75X940D 4-31. TAPE AND FLEXIBLE FLAT CABLE 51P TAPE FLEXIBLE FLAT CABLE 51P P/N: 1-849-347-11 XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 200 DISASSEMBLY 4. XBR-75X940D 4-32. CONNECTOR ASSY 20P AND TAPE CONNECTOR ASSY 20P P/N: 1-910-111-19 TAPE TAPE XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 201 DISASSEMBLY 4. XBR-75X940D 4-33. FLEXIBLE FLAT CABLE 30P(BD) AND FLEXIBLE FLAT CABLE 51P AND FLEXIBLE FLAT CABLE 30P FLEXIBLE FLAT CABLE 30P(BD) P/N: 1-910-111-16 FLEXIBLE FLAT CABLE 30P P/N: 1-910-111-15 FLEXIBLE FLAT CABLE 51P P/N: 1-849-348-11 XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 202 DISASSEMBLY 4. XBR-75X940D 4-34. BRACKET, STD L (3L GNT) NOTE: BRACKET, STD L (3L GNT) 4 screws (SCREW, +LH M3X2.1 STEP (GNT)) P/N: 4-586-665-01 XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 203 DISASSEMBLY 4. XBR-75X940D 4-35. BRACKET, STD R (3L GNT) NOTE: BRACKET, STD R (3L GNT) 3 screws (SCREW, +LH M3X2.1 STEP (GNT)) P/N: 4-586-665-01 XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 204 DISASSEMBLY 4. XBR-75X940D 4-36. TOP COVER (3L GNT) 8 screws (SCREW, +PSW M3X6) P/N: 4-472-518-11 TOP COVER (3L GNT) XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 205 DISASSEMBLY 4. XBR-75X940D 4-37. BRACKET, STD R (3L GNT) AND BRACKET, STD L (3L GNT) 10 screws (SCREW, +PSW M4X8) P/N: 2-580-600-01 BRACKET, STD R (3L GNT) BRACKET, STD L (3L GNT) XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 206 DISASSEMBLY 4. XBR-75X940D 4-38. SLIDE, CLAMP AND G3 SLIDE, CLAMP 6 screws (SCREW, +PSW M3X6 W12) P/N: 4-256-393-12 XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 207 DISASSEMBLY 4. XBR-75X940D 4-39. G2 6 screws (SCREW, +PSW M3X6 W12) P/N: 4-256-393-12 XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 208 DISASSEMBLY 4. XBR-75X940D 4-40. SHEET, INSULATION(GNT 3L) NOTE: SHEET, INSULATION(GNT 3L) XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 209 DISASSEMBLY 4. XBR-75X940D 4-41. BRACKET, INSIDE (PDT 3L) BRACKET, INSIDE (PDT 3L) XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 210 DISASSEMBLY 4. XBR-75X940D 4-42. BRACKET, SIDE (PDT 3L) BRACKET, SIDE (PDT 3L) XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 211 DISASSEMBLY 4. XBR-75X940D 4-43. BM1 8 screws (SCREW, +PSW M3X6) P/N: 4-472-518-11 XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 212 DISASSEMBLY 4. XBR-75X940D 4-44. DPS 4 screws (SCREW, +PSW M3X6) P/N: 4-472-518-11 XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 213 DISASSEMBLY 4. XBR-75X940D 4-45. SHEET THERMAL(GNT SAGI) AND SHEET, THERMAL(GNT DDR) SHEET, THERMAL(GNT DDR) SHEET THERMAL(GNT SAGI) XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 214 DISASSEMBLY 4. XBR-75X940D 4-46. SHEET, THERMAL(BM) AND PLATE, MAIN S(PDT) SHEET, THERMAL(BM) PLATE, MAIN S(PDT) 2 screws (SCREW, +PSW M3X6) P/N: 4-472-518-11 XBR-55/65X930D, 65X935D/937D, 75X940D...

  • Page 215: Lcd Panel

    DISASSEMBLY 4. XBR-75X940D 4-47. LCD PANEL LCD PANEL XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 216 DISASSEMBLY 5. SMART CORE (M) 5-1. BRACKET, WIFI ASSY BRACKET, WIFI ASSY XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 217 DISASSEMBLY 5. SMART CORE (M) 5-2. WLAN / BT MODULE(11AC) AND BRACKET, WIFI NOTE: BRACKET, WIFI NOTE: For This Model WLAN / BT MODULE(11AC) XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 218 DISASSEMBLY 5. SMART CORE (M) 5-3. COVER, TOP COVER, TOP XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 219 DISASSEMBLY 5. SMART CORE (M) 5-4. HSC4-M NOTE: HSC4-M XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 220 DISASSEMBLY 5. SMART CORE (M) 5-5. PANEL, ORNAMENT PANEL, ORNAMENT Sequence Information XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 221 DISASSEMBLY 5. SMART CORE (M) 5-6. GUIDE, LIGHT AND CASE, BTM (M) CASE, BTM (M) GUIDE, LIGHT XBR-55/65X930D, 65X935D/937D, 75X940D...

  • Page 222: Exploded Views

    • The construction parts of an assembled part are indicated with a collation number in the remark column. • Items marked " * " are not stocked since they are seldom required for routine service. Some delay should be anticipated when ordering these items. 1. XBR-55X930D REAR COVER REF.
  • Page 223 EXPLODED VIEWS 1. XBR-55X930D SP-BOX ASSY REF. No. PART No. DESCRIPTION MARK 4-588-214-02 BRACKET, SLIDE (L) (L GNT) 1-493-015-11 SWITCH UNIT (VM-WW) 4-582-343-01 HOLDER SIDE SW(GNT L M1) A-2093-478-A TSI MOUNT 4-580-891-01 BRACKET, TS 1-859-140-11 SP-BOX ASSY(W12-L CH-ND) 1-859-140-21 SP-BOX ASSY(W12-R CH-ND)
  • Page 224 EXPLODED VIEWS 1. XBR-55X930D LCD PANEL REF. No. PART No. DESCRIPTION MARK 4-587-362-01 AL TAPE, PWB LS (GNT) 4-581-500-01 LABEL, SIDE TERMINAL (GNT) 4-581-153-01 BRACKET, TOP(GNT) 4-579-715-01 BRACKET, SIDE (GNT) A-2094-419-A COMPL SVC BM1_UC_S 4-579-716-01 BRACKET, INSIDE (GNT) 4-581-502-01 LABEL, INSIDE TERMINAL (GNT)
  • Page 225 EXPLODED VIEWS 1. XBR-55X930D CONNECTORS REF.NO. PART No. DESCRIPTION MARK 1-849-319-11 FLEXIBLE FLAT CABLE 41P CN3600(DPS)-TCON(1) 1-849-325-11 FLEXIBLE FLAT CABLE 51P CN3601(DPS)-TCON(1) 1-849-326-11 FLEXIBLE FLAT CABLE 51P CN8701(BM1)-CN8700(DPS) (1) 1-910-111-05 FLEXIBLE FLAT CABLE 30P CN8301(DPS)-CN(LD) (1) 1-910-111-06 FLEXIBLE FLAT CABLE 30P(BD)
  • Page 226 EXPLODED VIEWS 1. XBR-55X930D SCREWS REF. DESCRIPTION PART No. SCREW, ORNAMENTAL M6X12 4-268-126-02 SCREW , +PWH M3X6 4-452-935-01 SCREW +BVTP 3X10 TYPE2 IT-3 7-685-647-79 SCREW, +PSW M3X6 4-472-518-11 SCREW, +LH M3X2.1 STEP (GNT) 4-586-665-01 JOINT, SCREW 4-400-043-11 XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 227 EXPLODED VIEWS 2. XBR-65X930D/935D/937D REAR COVER REF. No. PART No. DESCRIPTION MARK 4-580-271-01 COVER, SIDE (GNT) 4-584-551-01 LABEL, REAR TERMINAL (GNT) 4-584-552-01 LABEL, REAR TERMINAL (GNT) LA8/LA1/CO1/AR4/ECU 4-580-270-01 SCREW CAP (GNT) 4-582-003-01 CLAMP, CABLE(GNT L) A-2115-876-A REAR COVER (2L GNT) A 3-299-766-02 CATCHER XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 228 EXPLODED VIEWS 2. XBR-65X930D/935D/937D SP-BOX ASSY REF. No. PART No. DESCRIPTION MARK 4-580-268-02 BRACKET, SLIDE (L) (2L GNT) 1-493-015-11 SWITCH UNIT (VM-WW) 4-582-343-01 HOLDER SIDE SW(GNT L M1) A-2093-478-A TSI MOUNT 4-580-891-01 BRACKET, TS 1-859-140-11 SP-BOX ASSY(W12-L CH-ND) 1-859-140-21 SP-BOX ASSY(W12-R CH-ND) 4-586-388-01 COVER,UNDER (GNT) A 1-754-975-11...
  • Page 229 EXPLODED VIEWS 2. XBR-65X930D/935D/937D LCD PANEL REF. No. PART No. DESCRIPTION MARK 4-587-362-01 AL TAPE, PWB LS (GNT) 4-581-500-01 LABEL, SIDE TERMINAL (GNT) 4-581-500-31 LABEL, SIDE TERMINAL (GNT) LA8/LA1/CO1/AR4/ECU 4-581-153-01 BRACKET, TOP(GNT) LA8/UC2/LA1/AR4/ECU 4-581-153-11 BRACKET, TOP(GNT) 4-579-715-01 BRACKET, SIDE (GNT) 4-579-715-11 BRACKET, SIDE (GNT) LA8/LA1/CO1/AR4/ECU...
  • Page 230 EXPLODED VIEWS 2. XBR-65X930D/935D/937D CONNECTORS REF.NO. PART No. DESCRIPTION MARK 1-849-320-11 FLEXIBLE FLAT CABLE 51P CN8701(BM1)-CN8700(DPS) (1) 1-849-323-11 FLEXIBLE FLAT CABLE 51P CN3601(DPS)-TCON (1) 1-849-324-11 FLEXIBLE FLAT CABLE 41P CN3600(DPS)-TCON (1) 1-910-111-08 CONNECTOR ASSY 30P CN6001(LD)-CN401(DPS) (1) 1-910-111-10 FLEXIBLE FLAT CABLE 30P CN8301(DPS)-CN(LD) (1) 1-910-111-11 FLEXIBLE FLAT CABLE 30P(BD)
  • Page 231 EXPLODED VIEWS 2. XBR-65X930D/935D/937D SCREWS REF. DESCRIPTION PART No. SCREW, ORNAMENTAL M6X12 4-268-126-02 SCREW , +PWH M3X6 4-452-935-01 SCREW +BVTP 3X10 TYPE2 IT-3 7-685-647-79 SCREW, +PSW M3X6 4-472-518-11 SCREW, +LH M3X2.1 STEP (GNT) 4-586-665-01 JOINT, SCREW 4-400-043-11 SCREW, +LH M3X3 (CRN) 4-549-168-01 XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 232 EXPLODED VIEWS 3. SMART CORE (S) REF. No. PART No. DESCRIPTION MARK 4-580-149-01 PANEL, ORNAMENT A-2092-887-B HSC4-S MOUNT 4-580-146-01 CASE, BTM (S) 4-580-150-01 GUIDE, LIGHT 4-580-151-01 COVER, TOP 4-547-397-02 BRACKET, WIFI 1-458-853-11 WLAN/BT MODULE(11AC) XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 233 EXPLODED VIEWS 4. XBR-75X940D REAR COVER REF. No. PART No. DESCRIPTION MARK 4-579-997-01 AC COVER (GNT 3L) 4-585-151-01 LABEL, SIDE TERMINAL (PDT 3L) 4-581-663-01 COVER, SIDE (3L GNT) 4-584-551-02 LABEL, REAR TERMINAL (GNT) 4-585-153-01 LABEL, INSIDE TERMINAL(PDT 3L) 4-582-003-01 CLAMP, CABLE(GNT L) 4-580-270-01 SCREW CAP (GNT) 1-849-274-21...
  • Page 234 EXPLODED VIEWS 4. XBR-75X940D SP-BOX ASSY REF. No. PART No. DESCRIPTION MARK 4-582-344-01 HOLDER SIDE SW(GNT 3L M1) 1-493-015-11 SWITCH UNIT (VM-WW) A-2093-478-A TSI MOUNT 4-587-488-01 REAR COVER (3L GNT) A 1-859-108-61 SP-BOX ASSY(D20-WF RCH CH-ND) 1-859-109-21 SP-BOX ASSY(W20-SQ RCH CH-ND) 4-587-489-01 UNDER COVER (3L GNT) A 1-754-974-11...
  • Page 235 EXPLODED VIEWS 4. XBR-75X940D LCD PANEL REF. No. PART No. DESCRIPTION MARK 4-581-666-01 BRACKET, SLIDE L (3L GNT) A-2123-788-A PANEL SERVICE PKG INZ (3L GNT) 4-579-711-01 BRACKET, SIDE (PDT 3L) A-2115-078-A COMPL SVC BM1_UC_S_QF75 4-579-712-01 BRACKET, INSIDE (PDT 3L) A-2094-367-A DPS_G_22_LD COMPL 4-581-665-01 TOP COVER (3L GNT)
  • Page 236 EXPLODED VIEWS 4. XBR-75X940D CONNECTORS REF.NO. PART No. DESCRIPTION MARK 1-849-347-11 FLEXIBLE FLAT CABLE 51P CN3601(DPS)-TCON (1) 1-849-348-11 FLEXIBLE FLAT CABLE 51P CN8701(BM1)-CN8700(DPS) (1) 1-849-349-11 FLEXIBLE FLAT CABLE 41P CN3600(DPS)-TCON (1) 1-849-358-11 CONNECTOR ASSY 3P CN6102(G2)-CN6103(G3) (1) 1-910-111-15 FLEXIBLE FLAT CABLE 30P CN8301(DPS)-CN6001(LD) (1) 1-910-111-16 FLEXIBLE FLAT CABLE 30P(BD)
  • Page 237 EXPLODED VIEWS 4. XBR-75X940D SCREWS REF. DESCRIPTION PART No. SCREW, +PSW M6X12 4-567-081-01 SCREW , +PWH M3X6 4-452-935-01 SCREW +BVTP 3X10 TYPE2 IT-3 7-685-647-79 SCREW, +PSW M3X6 4-472-518-11 SCREW, +LH M3X2.1 STEP (GNT) 4-586-665-01 JOINT, SCREW 4-400-043-11 SCREW, +PSW M3X6 W12 4-256-393-12 SCREW, +PSW M4X8 2-580-600-01...
  • Page 238 EXPLODED VIEWS 5. SMART CORE (M) REF. No. PART No. DESCRIPTION MARK 4-580-149-01 PANEL, ORNAMENT A-2092-888-A HSC4-M MOUNT 4-580-147-01 CASE, BTM (M) 4-580-150-01 GUIDE, LIGHT 4-580-151-11 COVER, TOP 4-547-397-02 BRACKET, WIFI 1-458-853-11 WLAN/BT MODULE(11AC) XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 239 EXPLODED VIEWS 6. OTHER PART MISCELLANEOUS PART No. DESCRIPTION MARK PART No. DESCRIPTION MARK 1-493-117-13 AC ADAPTOR(240W) For 55"/65" 4-457-451-01 SHEET, THERMAL (BAF) For 55"/65" 4-549-186-01 SHEET, THERMAL(BM) 1-785-504-21 ADAPTOR, CONVERSION For 55"/65": LA8/ECU 4-589-129-01 SHEET, THERMAL(GNT DDR) For 75" 1-846-383-11 POWER-SUPPLY CORD SET For 55"/65": LA8/ECU...
  • Page 240 English 2016BL08-Data Made in Japan 9-888-590-02 © 2016. 2 Sony Visual Products Inc. XBR-55/65X930D, 65X935D/937D, 75X940D...
  • Page 241 APPENDIX-1 How to take off a rear cover After taking off screws for disassembly, Pull Rear Cover backside Pull Rear Cover to downside pull SLIDE BRACKET to upside Hook Hook Need to unfix the Hook If it is difficult, pull RC to downside with both bottom corner shaking RC.
  • Page 242 APPENDIX-2 How to disassemble HEAT SINK (BM1 board) <NOTE> HEAT SINK are already attached to the B board for service. If you need to disassemble HEAT SINK from B board for repair, Please cut HOLDER,HS WS(MUF) with tool (nippers) from B side of B board. However, please do it carefully because some damage may be given to the neighborhood parts or the B board itself.
  • Page 243 APPENDIX-2 How to disassemble HEAT SINK (DPS board) <NOTE> HEAT SINK are already attached to the DPS board for service. If you need to disassemble HEAT SINK from DSP board for repair, Please cut HOLDER,HS WS(MUF) with tool (nippers) from B side of DPS board. However, please do it carefully because some damage may be given nipper to the neighborhood parts or the DPS board itself.

This manual is also suitable for:

Xbr-65x930dXbr-65x935dXbr-65x937dXbr-75x940d

Table of Contents