Exploded Views; Pre-Installation Instructions; Installation Steps - Philips EasyKey User Manual

Exploded Views

1. Battery cover (x1) 6. Inside escutcheon
silicone pad (x1)
2.Inside escutcheon
anchor screw (x6) 7. Square shaft
compressed spring (x2)
3.Inside escutcheon
component (x1) 8. Square shaft (x2)
4.Mounting plate 9. Mortise (x1)
anchor screw (x4)
10. Connecting screw
5. Mounting plate (x1) tube (x4)
4
11. Grub screw (x4)
12.Outside escutcheon
silicone pad (x1)
13.Outside
escutcheon
component (x1)

Pre-installation instructions

Step 1 | Confirm the door opening direction
This product can be installed on doors of 4 directions: left-out pull, right-in push,
right-out pull and left-in push.
Left-handle open
Indoor
Left-in
push
Outdoor
Indoor
Left-
out pull
Outdoor

Installation steps

The following installation steps apply to right-open doors. For left-open doors,
please read the chapter [Pre-installation instructions] carefully and make needed
adjustments.
Install the M5 grub screws and screw
1
tubes into the outside escutcheon.
M5 grub
screw
Attention
Please use proper square shaft, connecting screw
tube and anchor screw tubes according to your
door's thickness.
Right-handle open
Indoor
Right-
in push
Outdoor
Indoor
Right-
out pull
Outdoor
Use the drilling template to drill
2
the needed holes in the door. Pass
the connecting cable of the outside
escutcheon through the door hole.
5