Advertisement
Available languages
Available languages
Mode PERManent
TIME/D ATE SU WI
Reset
Note!
A reset clears the entire memory, which means that all previously set
data will be lost. Press and hold all four keys together for about 2
seconds, then release them.
The Time, date, summertime/wintertime and switching times will
have to be re-entered.
Cell disposal
Switch off the device before dismantling the module. Do not switch on again until the module has been installed.
Always use a Li cell type battery (Li) CR2032, 3V. High temperature type min +70°C.
Operating principle: Type 1.B. S. T.
IEC/EN 60730-1, IEC/EN 60730-2-7
Operation in a normal environment
Montage: in distribution panel,
Degree of contamination: 2
Switch output, potential-free
Rated impulse voltage: 4 kV
Technische Änderungen vorbehalten. Zum späteren Gebrauch aufbewahren.
Subject to change without prior notice. Store for use at a later date.
Continous switching ON/OFF
AUTO
2514264120-01
3ZW1012-7LF45-6AA0
© Siemens AG 2013
Advertisement
