Philips 9000 Series Manual page 22

22
English
2
1
2 Pull the shaving head holder off the bottom
part of the shaving unit.
3 Rinse the hair chamber and shaving head
holder with warm water.
4 Turn the retaining ring counterclockwise
and lift it off the shaving head.
Repeat this process for the other retaining
rings. Place them aside in a safe place.
5 Remove the shaving heads from the
shaving head holder. Each shaving head
consists of a cutter and guard.
Note: Do not clean more than one cutter
and guard at a time, since they are all
matching sets. If you accidentally put a
cutter in the wrong shaving guard, it may
take several weeks before optimal shaving
performance is restored.
6 Clean the cutter and guard with warm
water.
7 Shake off excess water.
8 Put the cutter back into the guard.