Philips 9000 Series Manual page 23

6 Clean the cutter and guard under the tap.
7 Shake off excess water.
8 Put the cutter back into the guard.
9 Place the shaving heads in the shaving head
holder.
Note: Make sure the notches on both sides of
the shaving heads fit exactly onto the
projections in the shaving head holder.
10 Blue retaining ring: Place the retaining ring on
1
the shaving head and turn it clockwise to
reattach the retaining ring.
2
Place the arrows on the ring in line with the
projections in the shaving head holder. Turn the
ring clockwise until it clicks to indicate that the
ring is fixed.
- Orange retaining ring: Place the retaining ring
1
on the shaving head and turn it clockwise to
reattach the retaining ring. Repeat this process
for the other retaining rings.
2
23
English