Advertisement
1
Getting started
!
Please read the entire instructions once before following them step
by step.
A wide open space is recommended for assembly.
A phillips-head screwdriver is required to fasten the
stands to the TV set.
Be careful not to injure your fingers and keep children
away during assembly.
It is recommended that two or more people remove the
TV set from the box.
!
Thin TVs can easily bend. To avoid damage to this TV and its screen,
it MUST NOT be carried in a horizontal position when being moved.
3
Installing the stands
Remove both of the bottom polystyrene
1
foam bases. Carefully tear the plastic
bag until the bottom corner of the TV is
exposed.
Support the top of the TV set at all times to prevent
the TV from falling.
!
Before installing the matching stand, carefully
peel away the film from the area so that it will
not get stuck between the unit and the stand.
2
Unpacking
Cut the polypropylene strapping (plastic
1
strapping).
Open the top flaps of the box.
2
Lift up one side of the TV approx. 1 " (2.5
2
cm) and insert the matching stand upward
until it fits the main unit.
Fasten the matching stand to the TV with 2
3
screws (included).
2 screws
required
Remove all accessories.
3
!
DO NOT take the TV set out of the box
yet.
Remove the outer slipbox with care.
4
In the same manner
4
as step
, install the
2
other stand.
Fasten the other stand to the TV with 2
5
screws (included).
2 screws
required
Both stands should
6
now be securely
fastened.
Support the top of the TV set with a
5
hand to prevent the TV from falling.
Unhinge the retaining tabs and unfold
6
the left and right side of the bottom
packaging.
4
Lifting the TV set
Carefully lift the TV set as shown in the illustration and place it onto
a stable, level surface.
Advertisement
