Intrusion - D-Link DAP-2695 User Manual

Web User Interface
The Wireless Intrusion Protection window is used to set APs as All, Valid, Neighborhood, Rogue, and New. Click the Save button to let your changes
take effect.
Wireless Band Click the drop-down menu to select the
wireless band, 2.4GHz or 5GHz.
Detect Click Detect to initiate a scan of the network.
AP List Click the drop-down menu to select All, Valid,
Neighbor, Rogue, and New.
The following is a definition of the listed AP
categories:
Valid: An AP which is authenticated to the
network with encryption is classified as valid.
Neighbor: A detected AP with a weak signal
strength is classified as a suspect neighbor.
Rogue: An AP that has been installed on the
secure network with out explicit authorization.
New: An alternative category.
From the AP List select a detected AP and
click Set as Valid, Set as Neighborhood, Set
as Rogue, or Set as New to manually define
the category type for the AP. Alternatively,
click the radio button to mark all new access
points as valid or rogue.
D-Link DAP-2695 User Manual

Intrusion

36