Http Access; Firmware Loader - Upgrading The Cameras; Dibos8 Set-Up For Bosch Megapixel Cameras; Preparing Megapixel Cameras For Dibos8 - Bosch MegaPixel IP Camera NWC-0800 User Manual

Bosch megapixel ip camera user manual nwc-0700, nwc-0800, nwc-0900
Hide thumbs Also See for MegaPixel IP Camera NWC-0800:
Table of Contents

Advertisement

38 en | Software
4.2.19

HTTP access

Bosch MegaPixel cameras can be accessed from Internet
Explorer, via the in-camera web page. The web page allows
viewing live images and changing some of the camera settings.
The web pages can be addressed by typing in your browser's
Address bar:
http://ip_address (or) http://ip_address/index.html
Individual images can be requested from Bosch MegaPixel cam-
eras using a HTTP string.
Please refer to the DiBos8 section of this manual for the string
parameters.
4.2.20

Firmware Loader - Upgrading the cameras

Bosch MegaPixel cameras are upgradeable in the field.
The Firmware Loader is the software tool that loads the
upgrade files into the cameras.
Always follow the instructions that come with the upgrade file.
4.3
DiBos8 set-up for Bosch Megapixel
cameras
DiBos8 is using HTTP requests for live viewing and recording of
Megapixel images.
Though DiBos8 may not have display capabilities to view mega-
pixel camera images in full resolution, it does, however, process
and record the images in megapixel format. Detail of live and
recorded images can be viewed using the DiBos8 zoom func-
tion.
The megapixel camera can send up to 5 streams to the same or
different clients. The streams can have different frame rates
and resolution. In order to save storage space, DiBos8 could
record a high resolution low frame rate image of a camera and,
at the same time, record images of the area of interest at a high
frame rate. In this case, DiBos8 creates two cameras with the
same IP address but with different HTTP parameters.
For detail of DiBos8 installation, refer to its respective manuals
and instructions.
4.3.1

Preparing Megapixel cameras for DiBos8

For sending the motion trigger signal correctly to DiBos8, you
should check that the megapixel camera archive and motion
detector settings are correct.
F.01U.064.422 | V 1.0 | 2007.03
User Manual
MegaPixel IP Cameras
Bosch Security Systems

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Megapixel nwc-0700Megapixel nwc-0900Megapixel nwc-0800

Table of Contents

Save Article as PDF