Table of Contents
Advertisement
2.1.13 Binary Output Commands (Acknowledged)
DRIVE
Com-
Response
mand
ACK
1
2
ACK
1
ACK
2
ACK
7
ACK
7
ACK
7
ACK, no action
1
ACK, no action
1
ACK, no action
1
ACK, no action
2
ACK, no action
2
ACK, no action
2
ACK, no action
7
ACK, no action
7
Table 2.7: No Error Code coloumn in this table.
2.1.14 Binary Output (BO) Commands (Not Acknowledged)
DRIVE
Command
Response
NAK
1
NAK
1
NAK
2
NAK
2
NAK
2
1)
Table 2.8: No Subcommand coloumn in this table.
14
Subcom-
Region
NPA Object
mand
no.
-
4
0-10
-
4
0-10
-
4
0-10
2
4
0-10
2
4
0-10
3
4
0-10
-
4
0-10
-
4
0-10
-
4
0-10
-
4
0-10
-
4
0-10
-
4
0-10
7
4
0-10
8
4
0-10
Region
NPA Object no.
Attribute No.
4
0-10
4
0-10
4
0-10
4
0-10
4
0-10
Error code 11 is used because attributes are considered as fields/records in the point map database.
Attribute No.
Attribute Message Type
1
Byte
Read Binary Output Read structure attributes associ-
2
Byte
Read Binary Output Read structure attributes associ-
1
Byte
Write Binary Output Write to Object Configuration at-
-
Byte(0/1) Override Binary Out-
-
Byte(0/1) Override Binary Out-
-
-
Override Release
3
Integer
Read Binary Output Read Minimum On-time attribute
4
Integer
Read Binary Output Read Minimum Off-time attribute
5
Integer
Read Binary Output
3
Integer
Write Binary Output Write Minimum On-time attribute
4
Integer
Write Binary Output Write Minimum Off-time attribute
5
Integer
Write Binary Output Write Maximum Cycles/ Hour at-
-
-
Write Binary Output Optional command for slave de-
-
-
Read Binary Output
Attribute Message Type
6
Integer
Read Binary Out-
put
7
Integer
Read Binary Out-
put
2
Byte
Write Binary Out-
put
6
Integer Write Binary Out-
put
7
Integer Write Binary Out-
put
AF-600 FP Metasys
Comments
ated with each individual point
ated with each individual point
tribute associated with each
individual point
Write to binary output current
put
state (Drive control word)
Write to binary output current
put
state (Drive control word)
Set the current value, the value
that it was before the 1. Override
Command was issued
associated with each
individual point. Return value = 0
associated with each
individual point. Return value = 0
Read Maximum Cycles/ Hour at-
tribute associated with each
individual point. Return value = 0
associated with each individual
point
associated with each individual
point
tribute associated with each
individual point
vices. Only Attributes used for N2
commissioning purposes
Optional command for slave de-
vices. Only Attributes used for N2
commissioning purposes
Error Code
Comments
11
1)
Read Interstage on delay attribute
associated with each individual
point. (JCI use only)
1)
Read Interstage off delay attribute
11
associated with each individual
point. (JCI use only)
11
1)
Object Status not writeable
1)
Write Interstage on delay attribute
11
associated with each individual
point. (JCI use only)
Write Interstage off delay attribute
11
1)
associated with each individual
point. (JCI use only)
Advertisement
Table of Contents
