Requirements For Use; Project Engineering - Siemens CM 1542-1 Operating Instructions Manual

1.4

Requirements for use

1.4.1

Project engineering

Software for configuration and online functions
To configure the CP, the following configuration tool is required:
STEP 7 version
STEP 7 Professional V13
STEP 7 Professional V14
Downloading the configuration data
When there is a download to the CPU, the CM is supplied with the relevant configuration
data. The configuration data can be downloaded to the CPU via a memory card or any
Ethernet/PROFINET interface of the S7-1500 station.
CM 1542-1
Operating Instructions, 07/2019, C79000-G8976-C355-04
Properties and functions
1.4 Requirements for use
Functions of the CM
Most functions of the CM can be configured.
The full functionality of the CM can be configured
with the new functions of the firmware version
according to Preface (Page 3).
17