Page 27
Contents 5 Cleaning 1 Important Cleaning schedule Safety Cleaning the body of the 2 You air purifier appliance Product overview Cleaning the air quality Controls overview sensor Cleaning the water tank, 3 Get started water tray and NanoCloud Installing the NanoProtect rotary humidification wick filter Cleaning the pre-filter...
Page 28
• If the power cord is Danger damaged, you must have • Do not let water or any it replaced by Philips, a other liquid or flammable service center authorized detergent enter the by Philips, or similarly appliance to avoid electric...
Page 29
• Only use the original fan while cooking. Philips filters specially • If the power socket used intended for this to power the appliance appliance. Do not use any has poor connections, other filters.
Page 30
• Do not use this appliance • The appliance is only when you have used intended for household indoor smoke-type insect use under normal repellents or in places operating conditions. • Do not use the appliance with oily residues, burning incense, or chemical in wet surroundings or in fumes.
Page 31
Congratulations on your purchase, and the water tank and welcome to Philips! NanoCloud rotary To fully benefit from the support that Philips offers, register your product at humidification wick tray, www.Philips.com/welcome. and air dry the NanoCloud The Philips air purifier brings fresh, rotary humidification wick.
Page 32
Product overview Control panel NanoCloud rotary humidification wick (FY2425) Water tank Back side cover Wick support Pre-filter Water tray NanoProtect filter Pro S2(FY1417) antibacterial cartridge slot Air quality sensor Wick wheel Air outlet...
Page 33
Display panel: Controls overview Sleep mode Control buttons Auto mode Power on/off button Allergen mode Child lock button Purification ONLY mode Auto mode button 2-in-1 mode Fan speed button Filter replacement alert Humidity setting button Water refill alert Light dimming button Pre-filter and wick cleaning alert 2-in-1 mode on/off button PM2.5 display...
Page 34
3 Get started Remove all packaging materials of the NanoProtect filter. Installing the NanoProtect filter Before using the appliance, remove all packaging materials of the filter and place it into the appliance described as follows: Place the NanoProtect filter back Note into the appliance.
Page 35
To reattach the back cover, mount Remove all packaging material the panel onto the bottom of the of the NanoCloud rotary appliance first, and then push humidification wick. the top of the panel against the appliance. Note • The humidification wick has been Preparing for assembled on the wick wheel upon purchase.
Page 36
Place the water tray back into the Turn the top cap clockwise to tightly appliance. lock it onto the water tank. Turn the top cap of the water tank Place the water tank back into the anti-clockwise to unscrew it. appliance.
Page 37
4 Use the The professional-grade AeraSense appliance sensor detects the level of indoor air allergen and with numerical feedback from 1 to 12 the potential risk level of indoor air allergens can be displayed. 1 indicates best air quality. Understanding the air quality light Switching on and off Put the plug in the power socket.
Page 38
Setting the humidity level Switching the operation mode Touch the humidity button repeatedly to set the desired air The appliance has two operation humidity to 40%, 50%, 60% or " ". modes, the purification ONLY mode and the 2-in-1 mode. Note Touch the mode selection button •...
Page 39
Touch and hold for 3 seconds Using the light dimming twice to switch to actual humidity function level display. With the light dimming button, you can switch on or off the air quality light, the display screen and the function indicator if desired.
Page 40
Sleep (SL) Changing the Auto mode In Sleep mode, the air purifier operates setting quietly on a very low speed. • Touch the Auto mode button You can choose the Auto mode ( select the Sleep mode ( the Allergen mode ( ) and the Sleep »...
Page 41
Turbo (t) Setting the child lock In Turbo mode, the air purifier operates on the highest speed. Touch and hold the child lock • Touch the fan speed button button for 3 seconds to activate child lock. select the Turbo mode ( »...
Page 42
5 Cleaning Water level The water level in the water tank is visible through the water level window Note on the water tank. When there is not enough water in the • Always unplug the appliance before water tank, the water refill light goes cleaning.
Page 43
Open the air quality sensor cover. Cleaning the body of the appliance Regularly clean the inside and outside of the appliance to prevent dust from collecting. Wipe away dust with a soft dry cloth from the body of the appliance. Clean the air outlet with a soft dry cloth.
Page 44
Take the wick wheel off the wick Cleaning the water support. tank, water tray and NanoCloud rotary humidification wick Note • Cleaning the water tank, water tray and NanoCloud rotary humidification wick every week to keep them hygienic. Rinse the water tank, water tray and NanoCloud rotary humidification Pull out the water tank.
Page 45
• If the pre-filter is damaged, worn or into the corresponding grooves. broken, do not use. Visit Place the water tray back into the www.philips.com/support or appliance. contact the Consumer Care Center in your country. Filter alert light...
Page 46
Wash the pre-filter under a running Descaling the tap. If the pre-filter is very dirty, use NanoCloud rotary a soft brush to brush away the dust. humidification wick Filter alert light Follow this status Descale the F0 displays on the NanoCloud screen and wick&...
Page 47
Take the wick wheel off the wick Rinse the NanoCloud rotary support. humidificationwick under the tap to rinse away vinegar or citric acid residues. During rinsing, turn the wick so that both front and back are rinsed. Soak the NanoCloud rotary humidification wick in cleansing agent (e.g diluted white vinegar, Citric acid solution) for two hours.
Page 48
6 Replace the filter and wick Understanding the healthy air protect lock Remove the used NanoProtect filter This appliance is equipped with the from the appliance. healthy air protect lock to make sure that the Nano protect filter and the humidification wick are in optimal condition when the appliance is operating.
Page 49
Place the new NanoProtect filter Take the wick wheel off the wick support. into the appliance. Grip the shaft screw on the Touch and hold for 3 seconds to other side of the wheel, rotate it reset the NanoProtect filter lifetime anticlockwise to release the wick counter .
Page 50
Take the used NanoCloud rotary Place the wick wheel on the wick humidification wick out. support. Remove all packaging material Note of the new NanoCloud rotary humidification wick. • When placing the wick wheel on the wick support, make sure that the projections on the wick wheel falls into the corresponding grooves.
Page 51
Note • The antibacterial cartridge is not supplied, you can purchase it by calling Philips service hotline 400 800 008 or visit www.philips.com.cn. • Following the following steps to install the antibacterial cartridge (FY5131).
Page 52
7 Troubleshooting This chapter summarizes the most common problems you could encounter with the appliance. If you are unable to solve the problem with the information below, contact the Consumer Care Center in your country. Problem Possible solution • The filter replacement light has been flashing but you have not replaced the NanoProtect filter, and the appliance The appliance...
Page 53
This is normal. However, if the appliance produces a burnt smell even if removing filters, contact your The appliance Philips dealer or an authorized Philips service center. • The filter may produce smell after being used for a while produces a strange smell.
Page 54
(you find its phone number regarding exposure to electromagnetic in the worldwide guarantee leaflet). If fields. there is no Consumer Care Centre in your country, go to your local Philips Compliance with EMF dealer. Koninklijke Philips N.V. manufactures Order parts or...
Page 55
Recycling Do not throw away the product with the normal household waste at the end of its life, but hand it in at an official collection point for recycling. By doing this, you help to preserve the environment. Follow your country's rules for the separate collection of electrical and electronic products.