Table of Contents
Advertisement
Press [3, 4, 2, 1] to select a
Once activated, material
cannot be returned to its
still picture and press [ENTER].
original form. Check
A check mark appears on
carefully before
the still picture.
proceeding.
≥ Repeat this if you erase more than one still
picture.
To select all the still pictures in the folder
Press [3, 4, 2, 1] to select "Folder" and press [ENTER].
(A check mark appears on the folder's name; check marks
inputted separately will be erased.)
Press [3, 4, 2, 1] to select a still picture and
press [ENTER].
A check mark appears on the still picture.
≥ Repeat this if you set protection of more than one still picture.
To select all the still pictures in the folder
Press [3, 4, 2, 1] to select "Folder" and press [ENTER].
(A check mark appears on the folder's name; check marks
inputted separately will be erased.)
Press [3, 4, 2, 1] to select a
still picture and press [ENTER].
A check mark appears on the
still picture.
≥ Repeat this if you print more than one still
picture.
To select all the still pictures in the folder
Press [3, 4, 2, 1] to select "Whole" and press [ENTER].
(A check mark appears on the folder's name; check marks
inputted separately will be erased.)
Once activated, recorded
contents (including protected
still pictures and computer
data) will be completely erased.
Check carefully before
proceeding.
0001
0001
Press [3, 4, 2, 1]
to select "Set Up"
and press [ENTER].
0001
Press [2, 1] to
Press [2] to
select
select "SD card"
and press
or "PC card" and
[ENTER].
press [ENTER].
Press [3, 4, 2, 1]
to select
"Erase"
and press [ENTER]
A confirmation screen
appears.
To erase check marks
Press [3, 4, 2, 1] to select the folder or still picture with the check
mark and press [ENTER].
Press [3, 4, 2, 1] to
select "Set Up" or
"Cancel" and press
[ENTER].
To erase check marks
Press [3, 4, 2, 1] to select the folder or still picture with the check
mark and press [ENTER].
Press [2, 1] to
set number of
print (0 to 9).
To change print (DPOF) settings
1. Press [3, 4, 2, 1] to select "Whole" or a still picture with the DPOF
mark and press [ENTER].
2. Press [3, 4, 2, 1] to select "Set Up" and press [ENTER].
3. Press [2, 1] to change the print setting
≥ The print setting will be canceled if you set the number of print to "0".
4. Press [3, 4, 2, 1] to select "Set" and press [ENTER].
[Note]
The memory cards formatted on this unit
may not be usable on other equipment.
Press [2] to
select "Start" and
"Yes"
press [ENTER].
Format begins.
Press [2] to select
"
" and press
Erase
[ENTER].
.
Selected still pictures are
erased, and the still
picture select screen
reappears.
Press [2] to select
"Yes" and press
[ENTER].
The lock symbol appears
on the still picture when
the still picture is
protected.
Press [3, 4, 2, 1]
to select "Set" and
press [ENTER].
The DPOF mark
appears if you set
one or more
pictures to print.
Press
[ENTER]
to complete
the procedure.
37
RQT6981
Advertisement
Table of Contents
