LG AJ-LT91 Owner's Manual page 2

Replacing the Lamp
Replacing the Lamp
* Contact your dealer for replacing a new lamp.
The projector lamp usually lasts for about 2000 hours. You can see the used lamp
time in the Selecting Function section. You must replace the lamp when:
The projected image gets darker or starts to be deteriorated.
The lamp indicator is red.(red, flashing alternately)
When replacing the lamp, contact your dealer or the service center for the correct lamp.
1. Turn off the projector and unplug the power cable.
(Cool the lamp for more than 1 hour.)
2. Stand the projector on its side as below so that you can easily access the
lamp cover.
3. Remove the two retaining screws on the lamp cover with a screwdriver or
similar objects and then lift off the lamp cover.
<Bottom of projector>