Removing The Rechargeable Battery - Philips 1000 Series Manual

2 To attach the comb, make sure the side with the
desired hair length points upwards. Fit one of
the projections on the inside of the lug into the
small hole on the side of the appliance. Push
the other lug of the comb into place ('click')
(Fig. 9).
Note: Please make sure that the lugs of the
comb have been attached properly into the
holes on both sides of the appliance.
Before use
- For optimal safety, we advise you to always use
the appliance with a comb.
- This appliance is only intended for clipping
human scalp hair. Do not use it for another
purpose.
- When you clip hair for the first time, start with
the comb with the highest length to familiarize
yourself with the appliance.
- Make sure the hair is clean and dry. Do not use
the appliance on wet hair.
- Make sure the head of the person whose hair
you are cutting is at the same level as your
chest. This ensures that all parts of the head are
clearly visible and within easy reach.
Hair clipping with comb
The appliance comes with different hair combs.
Each side of each comb cuts to a different fixed
hair length. The indication on the inside of each
comb corresponds to the remaining hair length
after clipping.
Ear contouring comb
Hair comb
Hair comb
1 Comb the hair in the direction of hair growth.
2 Attach the desired comb onto the appliance
(see 'Removing or attaching combs').
3 To clip the hair, move the appliance through the
hair slowly. Make sure that the flat part of the
comb is in full contact with the scalp to obtain
an even cutting result (Fig. 10).
Hair clipping tips
- To clip most effectively, move the appliance
against the hair growth direction.
- Move the appliance in different directions
(upward, downward or across), because hair
doesn't all grow in the same direction.
- Make overlapping passes over the head to
ensure that the appliance catches all the hairs
that need to be cut.
- Write down which comb(s) you use to create a
certain hairstyle as a reminder for future
clipping sessions.
- Regularly remove cut hair from the comb. If a
lot of hair has accumulated in the comb,
remove it from the appliance and blow and/or
shake out the hairs (see 'Cleaning').
Cleaning
Never dry the cutting unit with a towel or tissue,
as this may damage the trimming teeth.
Clean the appliance every time you have used it.
Only clean the appliance with the cleaning brush
supplied.
Never use scouring pads, abrasive cleaning agents
or aggressive liquids such as alcohol, petrol or
acetone to clean the appliance.
1 Switch off the appliance and disconnect it from
the wall socket.
2 Wipe the housing of the appliance with a dry
cloth (Fig. 11).
3 Remove the comb and clean it with the
cleaning brush and/or rinse it under the tap
(Fig. 12).
4 Push the teeth of the cutting unit upwards to
remove it from the appliance (Fig. 13).
5 Clean the cutting unit with the cleaning brush
and/or rinse it under the tap (Fig. 14).
6 Clean the inside of the appliance with the brush
and/or rinse it under the tap (Fig. 15).
7 Carefully shake off excess water and let all
parts dry.
8 For optimal performance, the teeth of the
cutting unit with a drop of sewing machine oil
regularly (Fig. 16).
9 Insert the lug of the cutting unit into the guiding
slot and push the cutting unit back onto the
appliance.
Replacement
Replace damaged parts immediately. Always
replace the cutting unit with the original Philips
cutting unit.
1 Push the teeth of cutting unit upwards and pull
the cutting unit off the appliance (Fig. 13).
2 Remove the used cutting unit.
3 Insert the lug of the new cutting unit into the
guiding slot and push the cutting unit onto the
appliance ('click') (Fig. 17).
Recycling
- This symbol means that this product shall not
be disposed of with normal household waste
(2012/19/EU) (Fig. 18).
- This symbol means that this product contains a
built-in rechargeable battery which shall not be
disposed of with normal household waste (Fig.
19) (2006/66/EC). We strongly advise you to
take your product to an official collection point
or a Philips service center to have a
professional remove the rechargeable battery.
- Follow your country's rules for the separate
collection of electrical and electronic products
and rechargeable batteries. Correct disposal
helps prevent negative consequences for the
environment and human health.

Removing the rechargeable battery

The battery must be removed from the
appliance before it is scrapped.
1mm/1-9mm
3mm/6mm
9mm/12mm