Important Safety Information - Brother HL-L2300d Series Refill Instructions

http://www.urefilltoner.co.uk/
Use and safety of the melting tool
any harm, but be aware that it's there and retire the cartridge if it shows signs of
physically jamming.

Important safety information

 To be used only by a competent, risk-aware adult.
 Use only in a well-ventilated situation. As with the combustion of any organic
substance (such as petrol or tobacco) a cocktail of gases can be produced and some of
of the tool to dip.
 Take care not to melt through the tool's own electric cable.
 Do not use the tool with the end-piece or blank filler tip removed.
 Turn off and unplug the tool as soon as you've melted your hole. Leave to cool at least 2 metres away from
your toner pouring area.
 Do not leave on for more than 30 minutes at a time.
 After use, allow the tool to cool down naturally. Do not immerse in water.
 Take all precautions for the use of a powered hand tool. Use eye and hand protection.
Assumption of risk notice
We ourselves have no hesitation in researching and refilling cartridges using the melting technique in a well-
ventilated room. However, the company gives no warranties, neither explicit nor implicit, as to the safety of
melting holes in toner cartridges or the use of the melting tool. Any activity or process has an element of risk.
The onus is on you, the purchaser, to assess any possible risk, including the inaccuracy or incompleteness of
currently available information. If you decide not to go ahead, return the product to us and we'll cheerfully
refund your money. This offer is additional to your statutory rights.
©® Ownership of all intellectual property relating to the melting tool has been asserted and secured.
Safety Data Brother HL-L2300D type toner
Only to be used by a competent risk-aware adult. Not to be used by children.
Avoid inhalation of product. Avoid eye and skin contact. Do not ingest. Avoid sources of ignition
while pouring and at all times.
1 Identification of the substance and the company
Product name Brother HL-L2300 type refill toner
Part no. BR2300BOT
Supplier U Refill Toner Ltd. Contact details as per page header
2 Hazards identification
Classification Not believed to be classified as hazardous according to OSHA CFR 1910.1200 or EU Directive 1999/45/EC, as
amended.
Acute health effects
Skin contact Unlikely to cause skin irritation
Eye contact May cause irritation
Inhalation Irritation to respiratory tract if exposed to large amounts of toner dust
Ingestion Unlikely when used as intended. Acute oral toxicity is believed to be low
Potential health effects
Routes of exposure Skin contact, eye contact and inhalation. Ingestion unlikely.
Chronic health effects Prolonged inhalation of excessive amounts of any dust may cause lung damage
Carcinogenicity Carbon black is classified by IARC as group 2B (possible human carcinogen). Carbon black in this preparation,
due it its bound form, is not believed to present this risk.
Polypropylene (9003-07-0) is classified by IARC as group 3
facebook.com/urefilltoner
Original and largest selling do-it-yourself toner refill
The tool needs at least 5 minutes to reach an efficient melting
temperature.
To melt a hole, apply a light force similar to pressing on paper
with a ballpoint pen. Ease off the pressure as the tool sinks
into the plastic.
During the first 6 minutes of the first ever use, smoke will
come out of the heated part of the tool as manufacturing
lubricants burn off. This is normal.
Use a screwdriver to push out the residual plastic plug while
the tool is still hot.
Occasionally, the plastic
inside the cartridge. Try and get it out
using tweezers or pliers if you can. A
piece of plastic this size inside the
toner compartment doesn't usually do
these are harmful or at least irritant.
 All metal parts of
dangerously hot. Never touch any metal part of the tool,
including the steel shaft near the plastic handle.
 When not in hand, the tool is designed to be rested at an
angle created by the flange of the handle, keeping the hot
parts suspended above your surface. But take care that the
power cable doesn't force the handle to rise and the hot end
youtube.com/user/urefilltonerUK
Page 6
plug falls
urefilltoner.co.uk
the tool get