At The Controller; Menu Navigation; Adding The Device - Toro EVOLUTION Series Quick Start Manual

At the Controller

Menu Navigation

• Use or to navigate the menu commands.
• To change a value, press
field, then press
SELECT to input the desired value.
• Press

Adding the Device

For the EVOLUTION® Series controller and remote to
successfully communicate, identical PINs must be set in both
the controller and remote.
At the controller:
ADVANCED then
1. Press
to ADD/REMOVE DEVICE. Press
2. Press
ADVANCED
ZONE DETAILS
SCHEDULE STARTS
SCHEDULE DETAILS
SENSORS
ADD/REMOVE DEVICE
4
or to move to the desired
and to adjust the value.
.
3. Press to REMOTE
ADD/REMOVE DEVICE
WEATHER
SOIL 1
SOIL 2
SOIL 3
REMOTE
4. Press to enter the PIN field of the remote.
Press or
Use or to move between the numeric fields.
.
5. Press to input the desired value.
6. Press to return to the home screen.
* The WEATHER sensor is not available for the Australia
region.
.
ADD
*
ADD
ADD
ADD
14
98
to change the value.