Maintenance; Replacing An Oven Light - Bosch HBL8550 Use And Care Manual

Maintenance

Replacing an Oven Light

Part
Stainless Steel Surfaces
Plastic & Controls
Probe
Printed areas (words and
numbers)
m
CAUTION:
• Make sure the appliance and lights are cool and power to the
appliance has been turned off before replacing the light bulb(s).
Failure to do so could result in electrical shock or burns.
• The lenses must be in place when using the appliance.
• The lenses serve to protect the light bulb from breaking.
• The lenses are made of glass. Handle carefully to avoid
breaking. Broken glass could cause an injury.
• Light socket is live when door is open.
Use only 10 Watt, 12 Volt bi-pin halogen light bulbs. These bulbs can be purchased
through retail stores.
Use a clean, dry cloth to handle halogen light bulbs. This will increase the life of the
bulb.
To replace the halogen bulb on the oven ceiling:
Recommendations
Always wipe or rub in the direction of the grain.
Clean with a soapy sponge, then rinse and dry, or
wipe with Fantastik® or Formula 409® sprayed
on a paper towel. Protect and polish with
Stainless Steel Magic® and a soft cloth. Remove
water spots with a cloth dampened with white
vinegar. Use Bar Keeper's Friend® to remove
heat discoloration.
When cool, clean with soapy water, rinse and dry.
Wipe with soapy water. Do not submerge. Do not
wash in the dishwasher.
Do not use abrasive cleansers.
1. Turn off power to the oven at the main
power supply (fuse or breaker box).
2. Remove the glass cover by
unscrewing it.
English 44