This Rack Mounting Kit can be used to mount the AIT library in an EIA Standard 19-inch rack. For installation instructions, contact Sony Service Support Center. Compatible Rack Holes (Charges apply.) The Rack Mounting Kit is compatible with the Caution following shapes of screw holes.
Checking the Package Preparation Contents In order to mount the AIT library, first mount the rails and brackets on the library and rack. After opening the package, make sure that all of the following items are present. Contact your dealer if Before beginning work, always be sure to turn off the anything is missing.
Preparing the Library Preparing the Rack Mount the L-shaped brackets and inner rails on the Adjust the length of the rail assemblies with the length library. of the rack, and then mount the rail assemblies. Caution Adjusting the Rail Assembly Length •...
Page 13
When front-rear mounting flange spacing is Secure the rail assemblies with the set screws. 740 to 782 mm Secure both front and back to the rack. Reposition the screws in the two holes marked “2”, Make sure that the bracket screw holes as illustrated.
Release the locking arm and slide the library Mounting the AIT Library completely into the rack. On the right, lower the locking arm to release the in the Rack lock. On the left, lift the locking arm to release the lock. Insert the library to the rack and secure it in place.
Removing the Library from the Rack Caution The AIT library weighs approximately 13.5 kg/29.8 lbs. At least two people are needed in order to handle the library. Handling the AIT library on your own could result in back injury or other accidents resulting in injury or damage to the AIT library.