Package Contents; Description (Fig. A); Electrical Safety - DeWalt DW614 Original Instructions Manual

E NGLI SH
Example:
2016 XX XX
Year of Manufacture

Package Contents

The package contains:
1 Router
1 Parallel fence with guide rods
1 Collet 8 mm (GB: 1/4")
1 Wrench # 13/17
1 Guide bush 17 mm ø
1 Dust extraction channel
1 Instruction manual
• Check for damage to the tool, parts or
accessories which may have occurred during
transport.
• Take the time to thoroughly read and
understand this manual prior to operation.

Description (fig. A)

WARNING: Never modify the power
tool or any part of it. Damage or personal
injury could result.
1. On/off switch
2. Routing depth graduation
3. Depth stop
4. Plunge limiter
5. Depth stop locking bolt
6. Revolver depth stop
7. Spindle lock
8. Collet nut
9. Dust extractor
10. Parallel fence locking bolt
11. Router base
12. Speed control dial (DW615)
INTENDED USE
Your D WALT high performance router DW614,
E
DW615 has been designed for professional heavy
duty routing applications.
DO NOT use under wet conditions or in presence
of flammable liquids or gases.
This router is a professional power tool.
DO NOT let children come into contact with the
tool. Supervision is required when inexperienced
operators use this tool.
22
• Young children and the infirm. This appliance
is not intended for use by young children or
infirm persons without supervision.
• This product is not intended for use by persons
(including children) suffering from diminished
physical, sensory or mental abilities; lack of
experience, knowledge or skills unless they are
supervised by a person responsible for their
safety. Children should never be left alone with
this product.

Electrical Safety

The electric motor has been designed for one
voltage only. Always check that the power supply
corresponds to the voltage on the rating plate.
Your D WALT tool is double insulated in
e
accordance with EN60745; therefore no
earth wire is required.
WARNING: 115 V units have to
be operated via a fail-safe isolating
transformer with an earth screen
between the primary and secondary
winding.
If the supply cord is damaged, it must be replaced
by a specially prepared cord available through the
D WALT service organisation.
e
Mains Plug Replacement
(U.K. & Ireland Only)
If a new mains plug needs to be fitted:
• Safely dispose of the old plug.
• Connect the brown lead to the live terminal in
the plug.
• Connect the blue lead to the neutral terminal.
WARNING: No connection is to be
made to the earth terminal.
Follow the fitting instructions supplied with good
quality plugs. Recommended fuse: 13 A.
Using an Extension Cable
If an extension cable is required, use an approved
3–core extension cable suitable for the power input
of this tool (see Technical Data).The minimum
conductor size is 1.5 mm
2
is 30 m.
When using a cable reel, always unwind the cable
completely.
; the maximum length