Before Using Your Range; Using The Surface Unit Controls - Whirlpool RJE-390P Use And Care Manual

Digital Clock Stop Time Knob
Start Time Knob
Before using your range
IMPORTANT
This is the oni) fine print you'll find in this booklet. Please read it to
be sure you use your range as it was meant to be used.
We build appliances to last. but we can't control how they are used.
Before using it. you are personally responsible for making sure that it..
is properly installed and leveled on a floor that will hold the weight, and
In a well-ventilated room.
is connected only to the right kind of outlet. with the right electric supply
and grounding.
IS used only for jobs expected of home ranges.
is out of the weather
is properly malntaintjd
is
not
used by children or others who may not understand how It should
be used
Using the surface unit controls
To turn on surface
unit PUSH IN and
turn until desired set-
ting shows in the
window.
The Surface Unit Control Knobs must be pushed in before turning
them This helps avoid turning them on accidentally when wiping off the
Control Panel. And it helps keep small children from turning them on. You
must push in on them...then turn until the setting you want shows in
the window.
A design by t'a~ h knob tells which unit IS turned on by that knob.
(For example. [ . I shou's that the right front unit.. .the one closest to you
on your right.. .uill heist when you push in and turn that knob.)
The knob may be set anywhere between "HI" and "OFF." As you
use your surface units. you will get used to the settings that match your
pots. pans and favorite' foods the best
As a guide. the setting should cook at about the following heats:
HI
- To star I most foods cooking. To bring water to a boil.
MED-HI
--To hold a rapld boil: to fry pancakes or chicken.
MED
- To make gravy. puddings and icings: to cook large quan-
tlties of vegetables.
MED-LO
-- To keep food cooking after starting it at a higher setting.
LO
- To keep food ivarm until ready to serve. You can set the
heat higher or lower within the "LO" range to help keep
food at the temperature you want.
The Signal Light will glow whenever a Surface Unit is on. Be
sure this light is off when you have finished cooking.
3