Table of Contents
Advertisement
Electrical
connection
26
Only connect the dryer to an earthed outlet
installed in accordance with regulations.
Make sure that the voltage details on the
rating plate (visible when the door is open)
correspond with the mains voltage where the
appliance is set up. The connected load and
the fuse or miniature circuit breaker are also
specified on the rating plate.
Make sure that the plug and the socket
match, the cross section of the cable is
sufficient and the earthing system has been
installed in accordance with regulations.
Do not use multiple plugs/adapters or an
extension cable.
Only pull the mains plug out of the socket
using the grip on the plug. Do not connect
the appliance to the mains with wet hands.
Only have the mains cable replaced by the
after-sales service.
If the mains cable for the dryer is damaged,
have it replaced by the manufacturer or its
after-sales service.
Advertisement
Table of Contents
