Cleaning the Air Filter and Vents
Replacing the Air Filter
Parent topic:
Cleaning the Air Filter and Vents
Clean the projector's air filter and vents if they get dusty, or if you see a message telling you to clean
them.
1. Turn off the projector and unplug the power cord.
2. Gently remove the dust using a small vacuum designed for computers or a very soft brush (such as
a paintbrush).
Note: You can remove the air filter to clean both sides. Do not use water or any other solvent to
clean the air filter.
Caution: Do not use canned air. The gases may leave a flammable residue or push dust and debris
into the projector's optics or other sensitive areas.
Parent topic:
Related tasks
Turning Off the Projector
Replacing the Air Filter
Maintaining and Transporting the Projector
Air Filter and Vent Maintenance
79