Download Print this page

HP 11 Instructions page 2

Enabling battery safety mode, disabling battery safety mode

Hide thumbs Also See for 11:

1. After the battery is replaced, turn on or restart the computer. When the HP logo appears, press

F10 to enter BIOS Setup.

2. Select "System Configuration" tab using Right Arrow key. Look for the item "Battery Safety

Mode" and change the setting to "Disabled" using F5/F6 key.

3. Go to "Exit" Tab by Right Arrow key and choose "Exit Saving Changes", press Enter key, and

Select "Yes" in the dialog.

4. After you restart your computer again, Battery Safety Mode will be disabled and normal battery

activity will resume.