Download Print this page

Brother VC-500W Quick Start Manual

Hide thumbs Also See for VC-500W:

Download this manual

Infrastructure Mode Configuration

1) Press the Power button to turn your printer on.

･If the Wi-Fi button is lit in blue, Infrastructure mode is already configured. You can

close these instructions and continue with the installation.

・If the Wi-Fi button is flashing blue, press and hold the Wi-Fi button until it turns white

and then go to the next step.

･If the Wi-Fi button is lit in white, go to the next step.

2) Connect the device and your printer using Wireless Direct Mode by selecting the

printer's network name from the detected wireless networks.

Windows

・If there is more than one VC-500W in your environment, select a VC-500W wireless

network to confirm the last 4 digits are the same as the last 4 digits of the serial

number on the label on the base of your printer.

iOS / Android OS

Page 1 Windows iOS / Android OS ・If there is more than one VC-500W in your environment, select a VC-500W wireless network to confirm the last 4 digits are the same as the last 4 digits of the serial number on the label on the base of your printer.
Page 2 3) Open a web browser window and type “192.168.0.1”. 4) Select your language.
Page 3 5) Click [NETWORK WI-FI SETUP]. 6) Scroll the sidebar and select your Wi-Fi network name. 7) Enter the password of your Wi-Fi network name and click [Connect].
Page 4 8) When the following screen appears, Infrastructure mode is configured. You can now close this window and continue with your printer’s installation.