TABLE OF CONTENTS REFRIGERATOR SAFETY ...3 Proper Disposal of Your Old Refrigerator...3 INSTALLATION INSTRUCTIONS ...4 Unpacking ...4 Location Requirements...4 Electrical Requirements ...5 Water Supply Requirements ...5 Refrigerator Doors: Removing, Reversing (optional) and Replacing...6 Door Closing...7 Water Supply Connection...8 Normal Sounds ...9 REFRIGERATOR USE ...9 Ensuring Proper Air Circulation...9 Using the Control(s)...9...
Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others. All safety messages will follow the safety alert symbol and either the word “DANGER”...
INSTALLATION INSTRUCTIONS Unpacking WARNING Excessive Weight Hazard Use two or more people to move and install refrigerator. Failure to do so can result in back or other injury. Removing packaging materials Remove tape and glue residue from surfaces before turning on the refrigerator.
Electrical Requirements WARNING Electrical Shock Hazard Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter. Do not use an extension cord. Failure to follow these instructions can result in death, fire, or electrical shock. Before you move your refrigerator into its final location, it is important to make sure you have the proper electrical connection.
Refrigerator Doors: Removing, Reversing (optional) and Replacing TOOLS NEEDED: in. hex-head socket wrench, No. 2 Phillips screwdriver, flat-blade screwdriver, putty knife. IMPORTANT: Before you begin, turn the refrigerator control OFF. Unplug refrigerator or disconnect power. Remove food from doors. Door Removal & Replacement Top Hinge "...
Door and Hinge Removal in. Hex-Head Hinge Screw 1. Unplug refrigerator or disconnect power. 2. Keep both doors closed until you are ready to lift them free from the cabinet. NOTE: Provide additional support for the doors while the hinges are being moved. Do not depend on the door magnets to hold the doors in place while you are working.
Style 1 Style 2 3. Depending on your model, to level your refrigerator you may either turn the screw clockwise to raise that side of the refrigerator or turn the screw counterclockwise to lower that side. Place a level on top of the refrigerator to check adjustments.
Style 2 1. Tube Clamp 3. Compression Nut 2. Copper Tubing 3. The ice maker is equipped with a built-in water strainer. If local water conditions require periodic cleaning or a well is your source of water supply, a second water strainer should be installed in the in.
Mid-setting “4” REFRIGERATOR IMPORTANT: Give your refrigerator time to cool down completely before adding food. It is best to wait 24 hours before you put food into the refrigerator. If you add food before the refrigerator has cooled completely, your food may spoil. Adjusting the Refrigerator and Freezer Controls to a higher (colder) than recommended setting will not cool the compartments any faster.
To remove and replace a shelf: 1. Remove items from the shelf. 2. Slide the shelf straight out to the stop. 3. Depending on your model, lift back or front of the shelf past the stop. Slide shelf out the rest of the way. 4.
FREEZER FEATURES Your model may have some or all of these features. Features that can be purchased separately as product accessories are labeled with the word “Accessory.” Not all accessories will fit all models. See the “Assistance or Service” section if you are interested in purchasing one of the accessories.
Do not allow the Stainless Steel Cleaner & Polish to come into contact with any plastic parts such as the trim pieces, dispenser covers or door gaskets. If accidental contact does occur, clean plastic part with a sponge and mild detergent in warm water.
TROUBLESHOOTING Try the solutions suggested here first in order to avoid the cost of an unnecessary service call. Your refrigerator will not operate Is the power supply cord unplugged? Plug into a grounded 3 prong outlet. Has a household fuse or circuit breaker tripped? Replace the fuse or reset the circuit.
To locate the Whirlpool designated service company in your area, you can also look in your telephone directory Yellow Pages. For further assistance If you need further assistance, you can write to Whirlpool Corporation with any questions or concerns at: Whirlpool Corporation Customer Interaction Center for Kirkland Signature ®...
For two years from the date of purchase, when this refrigerator (excluding the water filter) is operated and maintained according to instructions attached to or furnished with the product, Whirlpool Corporation will pay for factory specified parts and repair labor costs to correct defects in materials or workmanship.