Table of Contents
Advertisement
System overview control panels
2–4
Protection category
Resistance
Vibration resistance, operating
Impact resistance
2.4
Standards compatibility
D CPS21T:
front cover IP65, otherwise IP54
Sheet metal housing(inside) IP00
Resistance to abrasion and resistance of all surfaces against mediums like:
D Solvent naphtha (CH20V3)
D n-Heptane
D Test oil (VS15665)
D Hydraulic oil
D Lubricants
D Water
CAUTION
Conditions hazardous to the product!
The ambient air must be free of electrically conductive pollutants
(e.g., acids, alkali, corrosives, salts, metallic vapours, etc.).Air intake
and exhaust filters must be serviced at regular intervals.
Frequency range: 10 to 150 Hz
Amplitude:
0.075 mm
Acceleration:
1 g
to EN 60068-2-6
15 g as per DIN IEC 68-2-27, no functional impediment.
Frequency range: 10...150 Hz
Amplitude:
0.075 mm
Acceleration:
1 g
The control panels are certified to comply with the following standards:
D EN 60,204-1
D EN 50,081-2
D EN 50 082-2
D EN50178
D EN 60,950
D EN 418
D EN 60,529
D EN 60 721
D EN 60 068-2-6
D EN 60 068-2-27
D .IS.114
.
For all CPS21Ts shipped from the factory, the CE licensing require-
ments have been met.
at 10 to 57 Hz
at 57 to 150 Hz
at 10 to 57 Hz
at 57 to 150 Hz
Electrical systems on machines
Basic specification for interference emission
(industrial environment)
Basic technical standard, interference resistance
(industrial environment)
with respect to VDE160
Overvoltage category II
Machine safety, Emergency STOP devices
Protection categories (incl. housings and
installation compartments)
Classification of environmental conditions
Vibration test
Impact test
X ray Radiation" Dir., as per Official Fed. Gazette
1070 073 826-101 (01.10) GB
Advertisement
Table of Contents
