Siemens SINUMERIK 840D sl System Manual page 17

Note
Flicking gestures with several fingers
The gestures only function reliably if you hold the fingers sufficiently far apart. The fingers
should be at least 1 cm apart.
Smart machine tool operation
System Manual, 12/2017, 6FC5397-7FP40-0BA0
Multitouch operation with SINUMERIK Operate
Tap and hold using 2 fingers
● Open cycles line by line to change (without input screen
form)
Tap with two index fingers
● Tap with two fingers simultaneously in the lower right and
left-hand corners of the panel to open the TCU menu.
The menu has to be opened for service purposes.
3.3 Operating with finger gestures
17