Bosch TPA 300 User Manual page 25

Use the virtual
keyboard to enter
the sensor ID of the
damaged sensor.
Ensure to enter
only a valid sensor
ID in the correct
format (decimal or
hexadecimal).
Position the blank
sensor in front of the
tool antenna to send
the ID to the new
sensor.
Wait a few
seconds during the
programming process.
Continue to wait
while the sensor is
being reprogrammed.
© Bosch Automotive Service Solutions Inc.
TPA 300 | User Guide | 25 | en-US
Send the
new ID to
the sensor
Program
the sensor
Continue
1699502721 | REV. A | MAY 2020