Sharp NU-SA Series Installation Manual

PLEASE READ THIS MANUAL CAREFULLY BEFORE INSTALLING OR USING THE MODULES.
PLEASE PASS ALONG THIS USER MANUAL TO YOUR CUSTOMER.
# IMPORTANT SAFETY INSTRUCTIONS p.1
# GENERAL INSTRUCTIONS p.1 ~ p.4
# INSTALLATION MANUAL -PHOTOVOLTAIC MODULES- p.4 ~ p.5
IMPORTANT SAFETY INSTRUCTIONS
This manual contains important safety instructions for the PV module that must be
followed during the maintenance of PV modules.
To reduce the risk of electric shock, do not perform any servicing unless you are
qualified to do so.
1. The installation must be performed by a certified installer /servicer to ensure
system integrity and safety.
2. The installation is only allowed after referring and understanding of
GENERAL INSRUCTONS
PHOTOVOLTAIC MODULES-. If you don't have your personal copy, please
contact your installer or local Sharp office listed in Sharp Solar web site :
URL : http://www.sharp-world.com/solar
http://www.sharp.eu
3. Do not pull the PV cables.
4. Do not touch any surface of module.
5. Do not place/drop objects onto the PV modules.
6. Do not disassemble or attempt to repair the PV module by yourself.
7. Do not drop the PV module.
8. Do not damage, pull, bend, or place heavy material on cables.
9. Upon completion of any service or repairs, ask the installer/servicer to
perform routine checks to determine that the PV modules are in safe and
proper operating condition.
1. INTRODUCTION
Thank you for choosing SHARP photovoltaic (PV) module.
installation that you must know before installing SHARP PV modules. This also contains safety information you need to be familiar with. All the information
described in this manual are the intellectual property of SHARP and based on the technologies and experiences that have been acquired and accumulated
in the long history of SHARP. This document does not constitute a guaranty, expressed or implied. SHARP does not assume responsibility and expressly
disclaims liability for loss, damage, or expense arising out of or in any way connected with installation, operation, use or maintenance of the PV modules. No
responsibility is assumed by SHARP for any infringement of patents or other rights of third parties that may result from use of PV module. SHARP reserves
the right to make changes to the product, specifications or installation manual without prior notice.
2. COMPONENTS
*this image can be applicable for all models regardless number of cells
INSTALLATION MANUAL
– Crystalline Photovoltaic Module –
NU-SA /SC*** series,
ND-RB*** series
and INSTALLATION MANUAL
GENERAL INSTRUCTIONS
This Installation Manual contains essential information for the electrical and mechanical
MODEL
10. When replacement parts are required, be sure the installer/servicer uses
parts specified by the manufacturer with same characteristics as the original
parts. Unauthorized substitutions may result in fire, electric shock, or other
hazard.
11. Consult your local building and safety department for required permits and
applicable regulations.
12. In regions with snow, the module can sustain a snow load of up to 50cm
(20in) (when the module is mounted in the portrait orientation / short frame
-
side facing down) or 100cm(39in) (when the module is mounted in the
landscape orientation / long frame side facing down).
13. As a result of sliding snow, the mechanical load increases when the number
of module rows in the matrix of a PV installation increases. When mounting
the module in the portrait orientation for more than 3 rows, the accumulated
snow load may cause the lower edge of the module frame to deform. Take
necessary measures (e.g. snow stopper) to avoid possible damage.
14. Periodically remove any overhanging snow and/or ice from the module
framework as it may cause deformation of the module frame.
CAUTION: HIGH VOLTAGE
To reduce the risk of electric shock, do not touch.
3. GENERAL INFORMATION
(INCLUDING WARNING AND SAFETY)
The installation of PV modules requires a great degree of skill and should
only be performed by a qualified licensed professional, including licensed
contractors and licensed electricians. Please be aware that there is a
serious risk of various types of injury occurring during the installation
including the risk of electric shock. All SHARP PV modules are equipped
with a permanently attached junction box that will accept variety of wiring
applications or with a special cable assembly for ease of installation, and
they do not require special assembly.
GENERAL WARNING
1. PV modules are heavy. Handle with care.
2. Before you attempt to install, wire, operate and maintain the PV
module, please make sure that you completely understand the
information described in this installation manual.
3. Contact with electrically active parts of a PV module such as terminals
can result in burns, sparks and lethal shock whether the PV modules
are connected or not.
1
SIM425-002