Setup Flowchart; Windows Users - Yamaha CRW2100SX Series Owner's Manual

Setup Flowchart

These flowcharts show the procedure for setting up the CRW2100SX drive. For
easy cross-referencing, the relevant pages in this manual are also given.

Windows Users

STEP
Do you have a SCSI card?
1
STEP
Check that the SCSI card is
2
recognized correctly (P.22)
STEP
Set up the CRW2100SX drive
3
1. Set the switches at the rear of the drive.
(P.12, 13)
2. Connect the SCSI and power cables,
then switch the drive on. (P.18-20)
STEP
Check that the CRW2100SX
4
drive is recognized correctly
(P.22)
Install the CD writing software
STEP
5
For details about how to install the
software, refer to the documentation that
came with it.
STEP Start using the CRW2100SX
6
drive!
Use the drive to create audio CDs, to
back up data on your hard disk, or for
whatever purpose suits your needs.
9
NO
YES
STEP
Purchase a SCSI card
1-1
Recommended models:
Adaptec AHA-2940-series (PCI)
Install the SCSI card
STEP
1-2
Read this manual and insert the
SCSI card into the appropriate
PCI slot on the computer.