Linked Operations With The Tv - Yamaha BD-S2900 Owner's Manual

What is linked operations with the TV
This unit has a convenient function that offers linked operations
that control equipment through HDMI. You can use this function
by connecting TV and/or amplifier/receiver with an HDMI cable.
See the operating instructions for connected equipment for
operational details.
• With linked operations with the TV, you can do the following:
1. Automatic input switching
2. Power on link
3. Power off link
See below for the details.
• This unit offers linked operations with a Panasonic TV with VIERA Link
or EZ Sync™.
• Non-HDMI-compliant cables cannot be utilized.
What you can do with linked operations with the TV
■ Automatic input switching
When the following operations are performed, the television will
automatically switch the input channel and display the corresponding
action.
– When play starts on the unit
– When an action that uses the display screen is performed (e.g., Direct
Navigator screen)
■ Power on link
When the television is off and the following operations are performed,
the television will automatically turn on and display the corresponding
action.
– When play starts on the unit
– When an action that uses the display screen is performed (e.g., Direct
Navigator screen)
Easy control only with Panasonic TV (VIERA) remote control
If you connect this unit to a TV that has "HDAVI Control 2" or "HDAVI
Control 3" function with an HDMI cable, you can operate this unit using the
following buttons on the TV remote control.
[ , , , ], [OK], [RETURN], [SUB MENU] and colored buttons
Use the remote control for this unit to operate any other buttons
(numbered buttons, etc.) that are not listed above.
• Refer to the TV operating instructions for operating TV.
■ Using the FUNCTIONS menu to operate this unit
By using the TV remote control, you can play media
using the FUNCTIONS menu.
1
Press the button for VIERA Link or EZ Sync™
on the remote control.
2
Select the player.
• The FUNCTIONS menu is displayed.
When you want to leave the TV on and set only
this unit to standby mode
STANDBY/ON] on this unit's remote control and set to
Press [
standby mode.
When not using linked operations with the TV
Set "HDMI Control" in the Setup menu to "Off". (

LINKED OPERATIONS WITH THE TV

e.g.,
BD Player FUNCTIONS
DVD-Video
Top Menu
Menu
SD card
Other Functions
OK
SUB
MENU RETURN
]
20)
■ Preparation
1 Connect this unit to your TV or amplifier/receiver with an HDMI
cable (] 4-5).
2 Set "HDMI Control" to "On" (] 20).
(The default setting is "Off".)
3 Set the linked operations on the connected equipment (e.g., TV).
4 Turn on all connected equipments and select this unit's input
channel on the connected TV so that the linked operations work
properly.
Also when the connection or settings are changed, repeat
this procedure.
■ Power off link
All connected equipment compatible with linked operation through
HDMI, including this unit, automatically turns off when you switch the
television off.
• This unit automatically turns off even during playback or any other
operation.
■ Playing music continuously even after turning off power to
the television (] 14)
Notes
• When [ ] (PLAY) is pressed on this unit for "Automatic input
switching" or "Power on link", the playback image is not immediately
displayed on the screen and it may not be possible to watch the contents
from where playback started.
• In this case, press [ ] or [
■ Using the sub menu to operate this unit
By using the TV remote control, you can play discs
using the "Control Panel" and display the Top Menu
(for BD-Video and DVD-Video) or Pop-up Menu (for
BD-Video).
1
Press [SUB MENU].
➜ This can also be displayed by using the
VIERA menu screen.
Note
You cannot use the sub menu while the Top
Menu for BD-Video or DVD-Video is
displayed.
2
Select an item, then press [OK].
Control Panel
Screen Aspect
Top Menu
Menu
Pop-up Menu
Rotate Right
Rotate Left
Zoom in
Zoom out
PLAYBACK
] to go back to where playback started.
e.g.,
Control Panel
Screen Aspect
Top Menu
Pop-up Menu
OK
SUB
RETURN
MENU
Control Panel is displayed.
Follow the indications on
the screen.
(] 10)
Top menu is displayed.
Menu is displayed.
Pop-up menu is displayed.
Rotate the still picture.
Enlarge or shrink the still
picture.
15
En