Connecting To A Stereo Amplifier That Has Neither 6 Channel Audio Signal Input Terminals Nor Dolby Digital Decoder - Yamaha DVD-C900 Owner's Manual

Connecting to a stereo amplifier that has neither 6 channel audio signal
input terminals nor Dolby Digital decoder
Connect this unit's MIXED 2CH AUDIO OUT terminals to the amplifier's audio signal input terminal printed as "DVD", "VIDEO",
"AUX", etc.
6 channel audio signals encoded with Dolby Digital are mixed down into 2 channels and output from the MIXED 2CH AUDIO OUT
terminals.
DIGITAL
VIDEO OUT SELECT
PCM/ DIGITAL
MPEG/DTS
VIDEO/
S VIDEO
COAXIAL OPTICAL
MIXED 2CH
AUDIO OUT
1
Connection cord
(included)
Note
If you have no stereo amplifier available, you can connect this unit's MIXED 2CH AUDIO OUT terminals to your TV's audio signal
input terminals (if your TV is equipped with RCA type audio signal input terminals).
For Custom Installer
REMOTE CONTROL (IN, OUT) terminals
These terminals are used for custom installation system.
When this unit is connected to the components for custom
installation system, you can operate this unit with the
system remote control.
Connect the REMOTE CONTROL IN terminal of this unit to
the output terminal of the central controller for custom
installation system.
By connecting the REMOTE CONTROL OUT terminal of
this unit to the REMOTE CONTROL IN terminal of the other
component, you can also operate it with the system remote
control. In this way, up to 6 components can be connected
in series.
Refer to pages 14-15 for VIDEO
OUT terminal connections.
COMPONENT
VIDEO OUT
VIDEO S VIDEO COMPONENT VIDEO
1
Y P P
B R
2
VIDEO OUT
Refer to pages 14-15 for VIDEO
OUT terminal connections.
DVD
For U.S.A. model only
This unit (U.S.A. model)
Amplifier
OUT IN
REMOTE
CONTROL
Connections
OUT IN
REMOTE
CONTROL
13