Playing Back A Recorded Song; Re-Recording A Previously Recorded Song - Yamaha Clavinova CLP-100 Owner's Manual

Recording Your Performance

Playing back a recorded song

Procedure
1.
Play back the recorded performance.
Press the
SONG [PLAY/PAUSE]
2.
Stop the performance.
To stop playback in the middle of a song, press the

Re-recording a previously recorded song

This section explains how to record again in case your performance
was not satisfactory.
Procedure
1.
Select a voice or voices (and other settings) for
recording, if necessary.
Repeat Step 1 on page 31 if you wish to change the previous settings.
For more information of the recorded data see page 34.
2.
Re-engage Record Ready mode.
Press the [REC] button, again.
The selected part's indicator lights in red.
Follow the procedure from Step 3 in "Recording a performance quickly" on
page 31 to re-record.
32
CLP-370/340/330, CLP-S308/S306 Owner's Manual
button to play back the recorded performance.
SONG [STOP]
button.
If you want to change the tempo,
reverb type, or effect type when
re-recording a part or when
recording to another part, do so
after you engage Record Ready
mode.
You cannot re-record in the mid-
dle of a song.
Pressing the SONG [PLAY/
PAUSE] button to start recording,
then pressing the SONG [STOP]
button to stop recording will erase
all previously recorded data on
the selected part.
NOTE
NOTE