Download Print this page

Sanyo VA-YV27X22SASA5 Instruction Manual page 2

Auto iris lens for 1/3" format color cameras

Advertisement

INSTRUCTION MANUAL
Auto Iris Lens for 1/3" Format Color Cameras
VA-YV27X22SASA5 / VA-YV28X28SASA5 / VA-YV33X15SASA5
Before mounting and using the auto iris lens, please read these instructions
carefully. Also, make sure to keep these instructions handy for future reference.
Safety Precautions
The symbols listed below are used in this manual to indicate warnings and cautions.
This indicates a situation that, if not heeded, may cause death or
WARNING
serious injuries.
This indicates a situation that, if not heeded, may cause injuries
CAUTION
and/or property damage.
WARNING
Do not allow water into the lens. It may cause fi re or electric shock. If water enters,
shut off the power supplied to the lens immediately.
Do not look at the sun or any sort of strong light source through the lens. It may
harm your eyes.
CAUTION
Before supplying power to the lens, make sure all devices are connected correctly.
When connecting or disconnecting a cable, make sure to hold the connector. Do not
pull or twist the cable, or it may get damaged. Damaging a cable may cause fi re or
electric shock.
Do not leave or store the lens under direct sunshine. The lens may converge light on
a near-by object and cause a fi re.
In the event of unusual smoke or smell, abnormal noise or if foreign objects are found,
shut off the power supplied to the lens, remove the lens from the camera immediately
and contact the dealer where you purchased this product or service shop.
Do not disassemble or remodel the lens without permission. It may impair the lens
functions, or cause electric shock.
NOTICES
The lens is precision instruments. Make sure not to apply strong impacts on them.
Mist may form on the lens when it is suddenly moved from a cool place to a very
hot and humid place. When moving the lens to such environment, take preventive
measures such as adapting the lens in advance to the ambient temperature of the
place where it will be used.
When storing the lens, avoid hot and humid places as well as places where there is
corrosive gas.
When not using the camera for a long time, put the cap on the lens.
This CCTV lens produces high-definition images from the center to the marginal
area on monitor as a result of the adopted aspherical lens and highly advanced
optical design technology. This is an optimum vari-focal lens for high-quality
image surveillance, even when used with an ordinary CCTV or mega-pixel camera.
Note: This lens is designed for CS mount cameras and cannot be used with C mount
cameras.
The iris of this lens cannot be controlled with Video signals. Make sure to use
this lens with a camera that can output DC signals.
Specifications
Model
External Dimensions
(W × D mm)
Focal Length
Maximum Relative Aperture
Iris Range
Image Size
Flange Focal Length
Focus Range
Field Angle
Horizontal
Vertical
Diagonal
Field of View at
Horizontal
M.O.D
Vertical
Control
Iris
1
Zoom*
Focus
Mount
Mass
Iris
Control
Characteristics
Coil Resistance
Operating Current*
Temperature
Operating
Storage
Relative Humidity
*1: As this is a vari-focal lens, it gets out-of-focus during zoom operation.
*2: The iris is automatically closed when the power is shut off.
Appearance and specification are subject to change without prior notice or obligations.
VA-YV27X22SASA5
D
W
ø37.5 × 54
2.2 mm – 6 mm
1 : 1.3
F1.3 - T360 (Equivalent to F360)
∞ - 0.3 m (From front of lens)
Wide: 120˚00´/Telephoto: 46˚26´
Wide: 91˚36´/Telephoto: 34˚59´
Wide: 146˚26´/Telephoto: 57˚44´
Wide: 1075 mm/Telephoto: 266 mm
Wide: 638 mm/Telephoto: 196 mm
Manual (Operation angle 58.8˚)
Manual (Operation angle 160.8˚)
Approx. 55 g
2
Name and Function of Each Component
Mounting the Lens
Press the threaded portion of the lens mount against the threaded portion of the
camera mount and slowly rotate the lens clockwise. Screw the lens firmly to the
camera.
Note: The lens mount is equipped with a slip mechanism. To change the rotational
direction of the lens to adjust the iris cable position, rotate the lens further
clockwise. If the lens reaches the stopper before the cable position is adjusted
and it cannot be rotated further, adjust by slowly rotating the lens counter-
clockwise.
Lens Maintenance
The lens surface is treated with antireflective coating. Dirty lens surface due to
dust, oil, fingerprints and the like causes harmful flare which results in lower lens
performance. Since dirt on the lens may contribute to tarnishing as well as formation
of mold, clean as indicated below whenever the lens is found to be dirty.
Dirt and dust
Gently remove dirt and dust with an oil-free, soft brush or blower brush (for
photography use).
Water droplets and oils
Gently wipe water droplets or oil with a clean, soft cloth and dry. Put some isopropyl
alcohol or lens cleaning solution onto an oil-free, washed-out cotton cloth or lens
tissue and gently wipe with circular motion, from the center of the lens toward the
edge.
VA-YV28X28SASA5
ø37.5 × 52
2.8 mm – 8 mm
1 : 1.2
F1.2 - T360 (Equivalent to F360)
ø6 mm (4.8 mm × 3.6 mm)
12.5 mm (In air)
Wide: 100˚00´/Telephoto: 35˚03´
Wide: 73˚45´/Telephoto: 26˚18´
Wide: 128˚29´/Telephoto: 43˚49´
Wide: 744 mm/Telephoto: 197 mm
Wide: 468 mm/Telephoto: 146 mm
Auto (See Iris Characteristics)
Manual (Operation angle 60.3˚)
Manual (Operation angle 180˚)
CS-mount
Approx. 50 g
Auto (Without amplifier)
Drive Coil: 190Ω ± 10%, Brake Coil: 500Ω ± 10%
Max. 23 mA at 4 V DC
10˚C – +50˚C
20˚C – +60˚C
35% – 90% (No condensation allowed)
① Focus ring locking screw
Loosen the ring screw and rotate the focus ring
manually in the F direction to make the lens focus
on far distance, or in the N direction to make
the lens focus on near distance. After adjusting,
tighten the screw.
* On VA-YV33X15SASA5, this screw locks the
zoom ring.
② Zoom ring locking screw
Loosen the ring screw and rotate the zoom ring
manually in the W direction to set the zoom to
wide, or in the T direction to set the zoom to
telephoto. After adjusting, tighten the screw.
* On VA-YV33X15SASA5, this screw locks the
focus ring.
③ Lens iris plug (4-pin connector)
Connect the plug to the iris output terminal on the
camera.
Cable length: 100 mm
❶ Brake coil (–)
❷ Brake coil (+)
❸ Drive coil (+)
❹ Drive coil (–)
④ Lens mount
VA-YV33X15SASA5
ø37.5 × 58.5
15 mm – 50 mm
1 : 1.5
F1.5 - T360 (Equivalent to F360)
∞ - 0.8 m (From front of lens)
Wide: 18˚08´/Telephoto: 5˚35´
Wide: 13˚34´/Telephoto: 4˚12´
Wide: 22˚43´/Telephoto: 6˚56´
Wide: 271 mm/Telephoto: 87 mm
Wide: 202 mm/Telephoto: 66 mm
Manual (Operation angle 54.4˚)
Manual (Operation angle 60˚)
Approx. 60 g
SANYO Electric Co., Ltd.
Printed in Japan
202B11714470

Advertisement

loading

This manual is also suitable for:

Va-yv28x28sasa5Va-yv33x15sasa5