Backing Up The Song Data Of This Unit To Your Pc - Yamaha MCX-2000 Owner's Manual Addendum

Backing up the Song Data of This
Unit to Your PC
n
It takes approximately 48 hours (when the song data is full of
the hard disk drive of this unit) to complete the backup of the
stored song data. Once this unit starts the backup of song
data, you cannot cancel the backup and carry out any
operation of this unit and your PC until the backup is finished.
Do not shut down the power of this unit and the PC during the
backup of the song data.
1
Start the file sharing of "mc_backup" folder on your
PC. See pages 20 and 21 for details.
2
Select "Top Menu" > "Setup" > "System Utilities".
Setup
System Information
System Reset
System Update
Lock Function
Song Data Management
Back
3
Select "Song Data Management".
Setup
Song Data Backup
Song Data Restore
Back
4
Select "Song Data Backup".
Setup
Use this utility to backup MCX-2000 song data to the PC.
For detailed information, refer to User's Manual.
You can start the backup process when PC is ready.
Step 1 : Press the > key to open the Submenu
Step 2 : Select "Start"
Cancel
MCX-2000 Owner's Manual Addendum for Version 2
22
System Utilities
Select
System Utilities
Song Data Management
Select
System Utilities
Song Data Management
Song Data Backup
Submenu
5
Open the Submenu, and then select "Start".
Setup
System Utilities
Song Data Management
Song Data Backup
Use this utility to restore MC
data on the PC.
For detailed information, refe
You can start the backup pro
Step 1 : Press the > key to op
Step 2 : Select "Start"
6
Select "OK" when the following message appears in
the OSD.
Setup
System Utilities
Song Data Management
Song Data Back up
Message
Use
For
The backup of song data begins.
You
Step
OK
Step
n
Once this unit has been rebooted, the "MusicCAST" splash
screen appears in the OSD during the song data backup
procedure. Use the front panel display to perform the following
operations.
7
Once this unit has been rebooted and the following
message appears in the front panel display, select the
PC on which you want to store the backup data.
When more than one PC is connected to the LAN,
you can switch the PC in the LAN by selecting
"Cancel" in the front panel display. When the network
ID of the desired PC appears in the front panel
display, select "OK" in the front panel display to
confirm your selection.
Son g Data Backup
LIBRARY
OK Cancel
Select
Submenu
S S tart
Cancel
Select
PC.
Cancel
Computer name
Confirms the selection
Switches the PC