Related Manuals for Yamaha DVX-700
Summary of Contents for Yamaha DVX-700
- Page 1 DVD HOME THEATER SYSTEM SYSTEME HOME CINEMA AVEC LECTUER DVD DVX-700 (DVR-700 + NS-PSW700 + NS-P700) OWNER’S MANUAL MODE D’EMPLOI...
-
Page 2: Important Safety Instructions
This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. 2 IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. - Page 3 Yamaha will not be held responsible for any damage resulting from use of this unit with a voltage other than as specified.
- Page 4 LASER SAFETY This unit employs a laser. Due to possible eye injury, only a qualified service person should remove the cover or attempt to service this device. DANGER This unit emits visible laser radiation when open. Avoid direct eye exposure to beam. When this unit is plugged into a wall outlet, do not place your eyes close to the opening of the disc loader and other openings or look inside.
-
Page 5: Table Of Contents
1. INTRODUCTION INTRODUCTION... 2 Main unit... 4 Supplied accessories ... 4 FUNCTIONAL OVERVIEW... 5 Front panel (DVR-700) ... 5 Rear panel (DVR-700)... 6 Front panel display (DVR-700)... 7 Rear panel (NS-PSW700)... 8 Remote control ... 9 2. CONNECTIONS CONNECTIONS... 11 Roles and layout of the speakers ... -
Page 6: Introduction
INTRODUCTION Thank you for purchasing this unit. This Owner’s Manual explains the basic operation of this unit. Notes about discs – This DVD controller is designed for use with the following discs. DVD disc: DVD-Video, DVD-R/-RW/-R DL, DVD+R/+RW/+R DL Compact Disc: Audio CD, CD-R, CD-RW, Video CD, Super Video CD Notes –... - Page 7 U.S. and other countries. Bluetooth is a registered trademark of Bluetooth SIG and is used by Yamaha in accordance with a license agreement. Windows Media is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries.
-
Page 8: Main Unit
Screw x 6 (for cover 3 x 6 mm) Stand x 2 (For NS-P700) Screw x 2 (for stand 4 x 10 mm) Owner’s Manual (Europe, Russia and Australia models) DVX-700 WP87010 STANDBY/ON POWER FUNC. 10KEY MOVIE MUSIC SPORTS GAME... -
Page 9: Functional Overview
■ Front panel (DVR-700) STANDBY / ON 1 STANDBY/ON Turns on the system, or sets it to standby mode (Page 22). 2 Disc loading slot Insert a disc to be played. 3 EJECT Ejects a disc in the DVD controller. Stops playback. -
Page 10: Rear Panel (Dvr-700)
FUNCTIONAL OVERVIEW ■ Rear panel (DVR-700) NS-PSW700 VIDEO SYSTEM CONNECTOR COMPONENT VIDEO OUTPUT 1 SYSTEM CONNECTOR terminal Connect to the subwoofer/system control (Page 16). 2 COMPONENT VIDEO OUTPUT jacks Connect to the Y PB/CB PR/CR jacks on your TV (Page 17). 3 VIDEO OUTPUT jack Connect to the video (composite) jack on your TV (Page 17). -
Page 11: Front Panel Display (Dvr-700)
2 DOCK indicator – Lights up when the system is receiving a signal from an iPod stationed in the Yamaha iPod universal dock (such as YDS-10 or YDS-11, sold separately) connected to the DOCK terminal of the subwoofer/system control (Page 20). -
Page 12: Rear Panel (Ns-Psw700)
SPEAKERS SPEAKER IMPEDANCE : 6 MIN. MAINS 5 DOCK terminal Connect the Yamaha iPod Universal Dock (such as YDS-10 or YDS-11, sold separately) or Yamaha Bluetooth wireless audio receiver (such as YBA-10, sold separately) (Page 20). 6 SIRIUS terminal Connect to a SiriusConnect tuner (sold separately). -
Page 13: Remote Control
■ Remote control DVX-700 WP87010 STANDBY/ON POWER FUNC. 10KEY MOVIE MUSIC SPORTS GAME STEREO ENHANCER NIGHT SLEEP DISP. MODE AUDIO DELAY ZOOM ON SCREEN BLUETOOTH AUDIO SUBTITLE ANGLE PLAY MODE CLEAR LOCK SRCH MODE AUTO/ MANUAL MEMORY TOP MENU MENU PRESET/CH INFO. - Page 14 You can select TV or STB by switching FUNC./ 10KEY. N VOLUME +/– Adjusts the volume level of DVX-700. O MUTE Mutes the volume of DVX-700. Press the button again to mute OFF. P Input selection buttons DVD/USB Switches the input source to DVD or USB. Each time you press the button, the input source changes in sequence.
-
Page 15: Connections
Produces front channel (stereo) sounds. Also produces virtual center channel sounds (dialogue, etc.) and virtual surround channel sounds effectively using the Yamaha front surround system. Place the left and right speakers at equal distances away from the listening position so that you can produce high quality surround sound. -
Page 16: Placing The Speakers Using The Stands
CONNECTIONS ■ Placing the speakers using the stands You can place the speakers in an upright position or a horizontal position. Put the speakers on the stands and secure them with the screws. When placing the speaker in an upright position Place the speaker on the stand vertically, and then secure it with the screw as shown in the illustration. - Page 17 – After attaching the speakers, check that the speakers are installed securely. Yamaha will bear no responsibility for any accidents caused by improper installations.
-
Page 18: System Connections
■ Connecting the speakers Note Do not connect the power cable of the subwoofer/system control into an AC outlet until all cable connections are completed. DVD controller NS-PSW700 VIDEO SYSTEM CONNECTOR COMPONENT VIDEO HDMI OUTPUT OUTPUT Speaker (R) SYSTEM CONNECTIONS Subwoofer/system control SYSTEM CONNECTOR... - Page 19 Connecting the speakers and subwoofer/system control Connecting the speakers Confirm the plug colors of the speaker cables. – Speaker cable with white plug: for speaker (L) – Speaker cable with red plug: for speaker (R) for speaker (R): Red plug 1 Push down the knob of the speaker terminal.
-
Page 20: Connecting The Dvd Controller And The Subwoofer/System Control
SYSTEM CONNECTIONS ■ Connecting the DVD controller and the subwoofer/system control Connect the SYSTEM CONNECTOR terminal at the rear of the subwoofer/system control to the SYSTEM CONNECTOR terminal at the rear of the DVD controller using the system control cable. NS-PSW700 VIDE SYSTEM... -
Page 21: Other Connections
■ Connecting a TV Notes – You only need to make one video connection from the following options (A or B), depending on the capabilities of your TV. – Do not connect the power cables until all cable connections are completed. <A>... -
Page 22: Connecting An Hdmi Component
OTHER CONNECTIONS ■ Connecting an HDMI component HDMI (High-Definition Multimedia Interface) is the first industry-supported, uncompressed, all-digital A/V (audio/ video) interface. By connecting to an HDMI component (such as a TV), you can enjoy standard, enhanced or high-definition video as well as digital audio using a single cable. When used in combination with HDCP (High-bandwidth Digital Content Protection), HDMI provides a secure audio/video interface that meets the security requirements... -
Page 23: Connecting External Av Components
■ Connecting external AV components If you connect external AV equipment, such as a VCR or cassette deck, to the audio input terminal on the subwoofer/system control, you can listen to those audio sources on the system. This section provides some examples of VCR and digital AV equipment connections. -
Page 24: Connecting The Power Cable
OTHER CONNECTIONS Connecting optional equipment The system is equipped with the DOCK terminal, which allows you to connect the Yamaha iPod universal dock (such as YDS-10 or YDS-11, sold separately) or Yamaha Bluetooth wireless audio receiver (such as YBA-10, sold separately). -
Page 25: Preparation
PREPARATION ■ Inserting batteries into the remote control Press 1 Press on the battery cover and open the cover. 2 Insert the two supplied batteries (AA, R6, UM-3) into the battery compartment. Insert the batteries according to the polarity markings (+ and –). -
Page 26: Turn On The System
GETTING STARTED ■ Turn on the system Press STANDBY/ON on the DVD controller or the remote control. The LED indicators beside the disc loading slot light up when the system is turned on. DVX-700 WP87010 STANDBY/ON TV STB STANDBY/ON FUNC. -
Page 27: Setting The Video Input/Output
■ Setting the video input/output Notes – Make sure that you have completed all the necessary connections (Refer to “Connecting a TV” on page 17). – If the settings you have selected are not appropriate, you can reset DVD settings to the initial factory settings (Refer to “System menu”... - Page 28 GETTING STARTED 4 Press on the remote control to highlight [TV Screen], and then press ENTER. Initial Setting Video Output TV Screen Language Component Out Display HDMI Resolution Options HDMI Color 5 Press on the remote control to highlight one of the options below, and then press ENTER.
-
Page 29: Setting Language Preferences
■ Setting language preferences You can select your preferred language settings so that this controller will automatically switch to your preferred language whenever you load a disc. If the language selected is not available on the disc, the disc’s default setting language will be used instead. -
Page 30: Basic Operations
BASIC OPERATIONS This unit is designed for use with DVD, CD, Video CD, and Super Video CD, as well as DivX files recorded on CD-R or DVD-R/DVD+R. IMPORTANT! – DVD discs and players are designed with regional restrictions. Before playing a disc, make sure that the disc is for the same zone as your DVD controller. -
Page 31: Basic Playback Controls
3 Mbps. The maximum bit rate varies depending on the encode method. – Advanced Profile is not supported. – DRM-Protected video files are not played in the DVD controller. ■ Basic playback controls DVX-700 WP87010 STANDBY/ON When using Numeric POWER keypad 0-9 FUNC. -
Page 32: Ejecting A Disc
DISC OPERATION ■ Ejecting a disc Press s to stop disc playback, and then press EJECT on the DVD controller. STANDBY / ON Note Do not push the ejected disc when reloading it. To reload the ejected disc, press EJECT, or remove the disc from the disc loading slot fully, then insert it to the disc loading slot once again. -
Page 33: Changing Subtitle Language
■ Changing subtitle language This operation works only on DVDs with multiple subtitle languages. You can change the language you want while playing a DVD. Press SUBTITLE repeatedly to select a language from the various subtitle languages. Notes – If you cancel the resume mode or eject the disc, the language gets back to the default setting. -
Page 34: Advanced Operation
DISC OPERATION ■ Advanced operation When playing discs, you can use advanced operations such as repeat playback and programming playback. Use the menu to set them. PLAY MODE CLEAR LOCK SRCH MODE AUTO/ MANUAL MEMORY TOP MENU MENU PRESET/CH INFO. A-E/CAT. - Page 35 Program playback Select [Program] in the Play Mode menu, then press ENTER. When playing a DVD, you can program the order the titles/chapters are played back. When playing a CD/Video CD, you can only program the order the tracks are played back.
-
Page 36: Disc Navigator
DISC OPERATION ■ Disc navigator When playing DVD or Video CD, you can display a list of titles and tracks using disc navigator. TOP MENU PRESET/CH INFO. A-E/CAT. ENTER SETUP TV/ STB 1 Press SETUP on the remote control. DVD setup menu appears. Video Adjust Play Mode Initial Setting... -
Page 37: Playing Other Discs
This system can play audio files and picture files recorded on CD-R or DVD-R/DVD+R, etc. Note The files and folders may not be recognized if the disc is in the following condition. There are 299 or more folders in a disc. There are 648 or more files or subfolders in a folder. -
Page 38: To Start A Slide Show Of Jpeg Files
PLAYING OTHER DISCS ■ To start a slide show of JPEG files JPEG files recorded on the disc are played back in order in slide show. During the slide show, you can play back all JPEG files in the disc in order. Hints –... -
Page 39: Using A Usb Device
PCs, etc. PLAYING OTHER DISCS Playing data files Yamaha and suppliers accepts no liability for the loss of data saved on the USB devices connected to the DVD controller. As a precaution, it is recommended that the files are tested after they have been saved on. -
Page 40: Dvd Setup Menu
DVD SETUP MENU DVD SETUP MENU OPTIONS ■ Menu overview [Video Adjust] menu Adjusts the picture quality. The bold items/parameters listed below are the default settings. Menu Item Setting item/Parameter Sharpness Fine, Standard, Soft Brightness Contrast Gamma High, Medium, Low, Off green 9 –... -
Page 41: Video Adjust Menu
This setup is carried out via the TV, enabling you to customize the DVD controller to suit your particular requirements TOP MENU MENU PRESET/CH INFO. A-E/CAT. A-E/CAT. ENTER SETUP RETURN CODE SET TV/ STB TUNER MUTE TV INPUT DVD/ USB INPUT 1-4 DOCK POSITION... -
Page 42: Initial Settings Menu
This setup is carried out via the TV, enabling you to customize the DVD controller to suit your particular requirements DVX-700 WP87010 STANDBY/ON When using Numeric POWER keypad 0-9 FUNC. 10KEY Switch FUNC./10KEY to MOVIE MUSIC SPORTS GAME 10KEY STEREO... - Page 43 [Interlace] (default) Select this if the connected TV does not have progressive display function. Notes – Do not select [Progressive] if the connected TV does not have progressive display function. – If your TV is also connected via HDMI OUTPUT terminal, the progressive signal may be output from the COMPONENT VIDEO OUTPUT jacks.
-
Page 44: Language
INITIAL SETTINGS MENU ■ Language These menus contain various language options for the audio, subtitle and disc menus recorded on the DVD. For details, Refer to “DISC OPERATION” on page 26. Initial Setting Video Output Audio Language Language Subtitle Language Display DVD Menu Lang. -
Page 45: Display
■ Display Set the screen display for the DVD controller. Initial Setting Video Output OSD Language Language Angle Indicator Display Options OSD Language Selects a language for the DVD setup menu. [English] (default), [Français], [Deutsch], [Italiano], [Español] Displays the DVD setup menu in the selected language. Angle Indicator Switches the angle mark on/off. - Page 46 When you change the country code, eject the disc once. Reinsert the disc to apply the settings. DivX(R) VOD Yamaha provides you with the DivX Demand) registration code that allows you to rent and ® purchase videos using the DivX VOD service.
-
Page 47: Other Functions
– To reproduce the original sounds, press STEREO. – The system automatically memorizes the settings assigned to each input source. When you select another input, the system automatically recalls the last settings for the selected input. DVX-700 WP87010 POWER Switch FUNC./10KEY to FUNC. -
Page 48: Shifting The Optimum Listening Area From Side To Side
AIR SURROUND XTREME ■ Shifting the optimum listening area from side to side This function shifts the optimum listening area from side to side according to your listening position for the best Virtual Surround effect. The optimum listening area TOP MENU PRESET/CH INFO. -
Page 49: Checking The Virtual Surround Effect
Hint This function is available when the surround mode or extended stereo mode is on. If you do not operate this function within 30 seconds after entering area setting mode, the setting automatically exits area setting mode. ■ Checking the virtual surround effect You can check the virtual surround effect using test tones produced from the speakers. -
Page 50: Listening To Fm Broadcasts
Preset tuning mode You can preset the desired FM stations in advance, and then recall the station by specifying the preset group and number. ■ Basic tuning operation DVX-700 WP87010 When using Numeric STANDBY/ON POWER keypad 0-9 FUNC. -
Page 51: Using Station Preset Feature
Direct frequency tuning Use this feature to tune into the desired station directly by entering the frequency. 1 Press TUNER to set the input source to FM. 2 Press AUTO/MANUAL to select automatic tuning mode or manual tuning mode. 3 Use Numeric keypad 0-9 to specify a radio frequency. - Page 52 LISTENING TO FM BROADCASTS Notes – Any stored station data existing under a preset number is cleared when you store a new station under the same preset number. – If the number of received stations does not reach 40 (A1 to E8), automatic preset tuning automatically stops after searching for all the available stations.
-
Page 53: Recalling The Preset Stations
Notes – Any stored station data existing under a preset number is cleared when you store a new station under the same preset number. – The reception mode (stereo or monaural) is stored along with the station frequency. ■ Recalling the preset stations If you have stored the preset stations based on “Presetting radio stations”, you can recall them using the following procedures. -
Page 54: Listening To Xm
LISTENING TO XM XM Satellite Radio offers an extraordinary variety of commercial-free music, plus the best in sports, news, talk and entertainment. XM is broadcast in superior digital audio from coast to coast. From rock to reggae, from classical to hip hop, XM has something for every music fan. -
Page 55: Basic Xm Satellite Radio Operations
■ Basic XM Satellite Radio operations DVX-700 WP87010 STANDBY/ON POWER When using Numeric keypad 0-9 FUNC. 10KEY Switch FUNC./10KEY to MOVIE MUSIC SPORTS GAME 10KEY STEREO ENHANCER NIGHT SLEEP Numeric keypad 0-9 DISP. MODE AUDIO DELAY ZOOM ON SCREEN BLUETOOTH... -
Page 56: Setting The Xm Satellite Radio Preset Channels
LISTENING TO XM ® SATELLITE RADIO BROADCASTS Direct number access mode 1 Press SRCH MODE on the remote control repeatedly to select “ALL CH SEARCH” or “CAT SEARCH”. 2 Press the Numeric keypad 0-9 to enter the desired 3-digit channel number. For example, to select the channel “123”, enter 123 using Numeric keypad 0-9. -
Page 57: Displaying The Xm Satellite Radio Information
■ Displaying the XM Satellite Radio information You can display the XM Satellite Radio information (such as channel number, channel name, category, artist name, or song title) for the currently selected channel in the front panel display. SRCH MODE AUTO/ MANUAL MEMORY TOP MENU MENU... -
Page 58: Listening To Sirius Satellite Radio™ Broadcasts
LISTENING TO SIRIUS SATELLITE RADIO™ BROADCASTS SIRIUS Satellite Radio provides over 130 channels of exclusive entertainment and 100% commercial-free music. Only SIRIUS has more than 65 original music channels, from today’s hits to R&B, oldies, and classical masterpieces. From authentic country and real bluegrass to cool jazz, hot latin, reggae, rock and many more. -
Page 59: Activating Sirius Satellite Radio™ Subscription
12-digit number and it appears on the package of the SiriusConnect tuner, on the label of the SiriusConnect tuner, and when you tune into the SIRIUS Satellite Radio channel “0” (see below). DVX-700 WP87010 STANDBY/ON POWER When using Numeric keypad 0-9 FUNC. - Page 60 LISTENING TO SIRIUS SATELLITE RADIO™ BROADCASTS Hints – If you tune into a channel that you do not subscribe, “CALL 888-539-SIRIUS TO SUBSCRIBE CH xxx” appears in the front panel display. To scroll the message again, press INFO.. – You can set the SIRIUS Satellite Radio preset channels (Page 57).
-
Page 61: Setting The Sirius Satellite Radio™ Preset Channels
■ Setting the SIRIUS Satellite Radio™ preset channels LOCK AUTO/ MANUAL SRCH MODE MEMORY TOP MENU MENU PRESET/CH INFO. A-E/CAT. ENTER A-E/CAT. SETUP RETURN CODE SET TV/ STB You can use this feature to store up to 40 SIRIUS Satellite Radio channels (A1 to E8: 8 preset channel numbers in each of the 5 preset channel groups). -
Page 62: Setting The Parental Lock
SIRIUS Satellite channels. The system automatically skips the locked channels when the system is in the All Channel Search mode or Category Search mode and you search a channel by pressing PRESET/CH DVX-700 WP87010 STANDBY/ON POWER When using Numeric keypad 0-9 FUNC. -
Page 63: Displaying The Sirius Satellite Radio™ Information
Tuning into the locked channels You can tune into the locked channels by the Direct number access mode or preset tuning mode. When you tune into the locked channel, following message appears in the front panel display. Enter the code number you set for the parental lock feature by using Numeric keypad 0-9. -
Page 64: Using Optional Equipment
USING OPTIONAL EQUIPMENT ■ Using iPod™ Once you have stationed your iPod in the Yamaha iPod universal dock (such as YDS-10/ YDS-11, sold separately) connected to the DOCK terminal of the subwoofer/system control (Page 20), you can enjoy playback on your iPod. -
Page 65: Using Bluetooth™ Components
The contents of the iPod menu vary, depending on the model or the generation. ■ Using Bluetooth™ components You can connect the Yamaha Bluetooth wireless audio receiver (such as YBA-10, sold separately) to the DOCK terminal of the subwoofer/system control and enjoy the... - Page 66 4 Press and hold BLUETOOTH ON for more than 3 seconds to start pairing. “Searching...” appears when the pairing starts. While the Yamaha Bluetooth wireless audio receiver is in pairing mode, the DOCK indicator flashes in the front panel display.
-
Page 67: Useful Operation
USEFUL OPERATION ■ Adjusting the audio delay FPD TV images sometimes lag behind the sound. You can use this function to delay the sound output to synchronize it with the video image. DVX-700 WP87010 STANDBY/ON POWER Switch FUNC./10KEY to FUNC. -
Page 68: Adjusting The Audio Balance For The Playback
USEFUL OPERATION ■ Adjusting the audio balance for the playback You can adjust the volume balance of the virtual speakers and subwoofer. TOP MENU MENU PRESET/CH INFO. A-E/CAT. ENTER A-E/CAT. SETUP RETURN CODE SET TV/ STB TV INPUT TUNER MUTE DVD/ USB INPUT 1-4 DOCK... -
Page 69: Setting The Sleep Timer
■ Setting the sleep timer The sleep timer function sets the system to the standby mode automatically at the preset time. STEREO ENHANCER NIGHT SLEEP DISP. MODE AUDIO DELAY ZOOM ON SCREEN BLUETOOTH AUDIO SUBTITLE ANGLE PLAY MODE CLEAR LOCK Press SLEEP repeatedly until the desired turn-off time is displayed. -
Page 70: Setting The Preset Code
TV or Set top box (STB). Set the preset codes depending on the components. Hint The preset cords are set to “298” (TV) and “748” (STB) as the default settings. DVX-700 WP87010 STANDBY/ON POWER FUNC. 10KEY Switches TV or STB. -
Page 71: Additional Information
If there is any problem with your unit, check the following items. If you cannot solve your problem with the following remedies or if your problem is not listed below, turn off the system and unplug the unit, then consult the nearest authorized Yamaha dealer or service center. General... -
Page 72: Xm Satellite Radio
TROUBLESHOOTING Problem The picture is not displayed on the TV screen. The picture is not displayed on the TV screen correctly. The message “HDMI ERROR” is displayed or the picture is not displayed on the HDMI TV screen. Tuner (FM) Problem FM stereo reception is noisy. - Page 73 Status message LOADING NO SIGNAL OFF AIR CH UNAUTH CH UNAVAIL - - - - UPGRADE XM TUNER SIRIUS Satellite Radio If an operation takes longer than usual or an error occurs, one of the following messages may appear in the front panel display.
- Page 74 Remedy Only iPod (Click and Wheel), iPod touch, iPod nano, and iPod mini are supported. Station your iPod back in the Yamaha iPod universal dock (YDS-10 or YDS- 11, sold separately) connected to the DOCK terminal of this system. page...
- Page 75 The Bluetooth component is disconnected from the Yamaha Bluetooth wireless audio receiver. The pairing is performed when the Perform the pairing when the Yamaha Yamaha Bluetooth wireless audio Bluetooth wireless audio receiver is not receiver is connected to the Bluetooth connected to the Bluetooth component.
- Page 76 TROUBLESHOOTING Problem Cannot select foreign language soundtracks or subtitles. Subtitles are not displayed. Cannot select camera angles. Cannot play some files. Cannot record a DVD. The TV picture is disturbed. The picture is stretched or black bars are displayed. Ghosting appears in some areas of the picture.
- Page 77 Problem The message “NO USB” or “USB ERROR” is displayed. Cause The USB device is not compatible, or Turn this unit off and on again. this unit cannot supply enough power Set this unit to standby, disconnect the to the device for it to function properly. USB storage device, and then reconnect it.
-
Page 78: Glossary
AAC (Advanced Audio Coding) An audio compression scheme defined as part of the MPEG-2/MPEG-4 standard. AAC supports up to 48 channels and generally achieves better sound quality than MP3 at the same bit rate. Analog Sound that has not been turned into numbers. Analog sound varies, while digital sound has specific numerical values. - Page 79 Interlace The most common type of scanning used in televisions. It divides a screen into even and odd numbered fields for scanning, and then builds an image by combining them into one image (frame). JPEG (Joint Photographic Experts Group) A standardized image compression system proposed by the Joint Photographic Experts Group.
-
Page 80: Specifications
DVR-700 Input Others ... USB: 1 Output Video ...Composite: 1 Others ...System Connector: 1 Dimensions (W x H x D)... 360 x 68 x 224 mm Weight ... 2.6 kg NS-P700 Woofer... 5.5 cm cone woofer x 2, Tweeter...2.5 cm Balanced dome tweeter, Input Power (Nominal/Maximum)... -
Page 81: Index
ADDITIONAL INFORMATION ■ A-B repeat playback ... 30 AIR SURROUND XTREME ... 43 Angle Indicator, Display menu ... 41 angle selection ... 29 ANGLE, remote control ... 10 ANTENNA terminal, subwoofer/system control rear panel ... 8 AREA, remote control ... 10 AUDIO DELAY, remote control ... - Page 82 INDEX ■ random playback ... 30 Rear panel, subwoofer/system control ... 8 Recalling preset station, FM ... 49 Remote control ... 9 Remote control sensor, front panel ... 5 remote control using ... 21 repeat playback ... 30 resuming playback ... 29 RETURN, remote control ...
-
Page 83: Appendix
APPENDIX LIST OF PRESET CODES LISTE DES CODES PRÉDÉFINIS Brand name Preset code Yamaha 299, 292, 242, 285, 287, 253, 206 Admiral 292, 293, 216 Aiwa 294, 276, 283, 284 Akai 295, 296 Alba Bell & Howell Bester Blaupunkt 229, 222... -
Page 84: List Of Country Codes
Brand name Preset code Bell expressvu 822, 855 DirecTV 825, 832, 842, 843, 846, 848, 849, 856, 857, 858, 859, 862, 863, 864, 865, Dish Network 822, 854, 855 system Dishpro 822, 854 Echostar 822, 854, 855 Expressvu 837, 838, 839, 857, 858 General Instrument Hitachi... -
Page 85: List Of Language Codes
LIST OF LANGUAGE CODES LISTE DE CODES DE LANGUES Language Lanruage code Abkhazian 0102 Afar 0101 Afrikaans 0106 Albanian 1917 Amharic 0113 Arabic 0118 Armenian 0821 Assamese 0119 Aymara 0125 Azerbaijani 0126 Bashkir 0201 Basque 0521 Bengali 0214 Bhutani 0426 Bihari 0208 Bislama... - Page 86 LASER INFORMATION INFORMATION LASER ● The name plate is located on the rear panel of the DVD controller. ● La plaque signalétique se trouve sur le panneau arrière du lecteur de DVD. © 2008 All rights reserved. Without top cover Sans couvercle supérieur Printed in China WQ33520...