Handling Precautions - Canon N10-W02 Instruction Manual

Handling Precautions

Connection/Installation
• For details on connecting and disconnecting the connection cable, be sure to refer to the instruction manual of the device
supplying power to the camera using PoE.
• Strong shocks may cause damage to the camera's connection terminal. Keep the connection cable bundled as close as possible
to the camera and do not subject the connection terminal to shocks.
Before Use
When the camera's internal temperature rises, the focus may shift slightly. After the camera starts, wait a while and then begin use.
About the CMOS Sensor
The CMOS sensor is produced using high-precision manufacturing techniques. However, if a pixel does not operate to
specification, the effect might appear as a white or black dot on a monitor. This is the nature of CMOS sensors and does not
represent a malfunction.
Condensation
If the camera is brought into a warm room while it is cold or if the room is heated quickly, condensation may form on the camera's
external or internal surfaces. Using the camera in such case may damage it.
Cleaning
• Before cleaning the camera, be sure to disconnect the connection cable from the camera.
• Use a soft, dry cloth to clean the camera's body. Never use chemically treated cloths or volatile solvents such as paint thinner.
• Be sure to keep the lens clean at all times. Remove dust or dirt particles using a blower and then wipe the lens.
Disposal
• Do not dispose with normal waste. Do not include the camera in waste that will be taken to a landfill.
• Observe the rules and regulations of your local authorities when disposing.
Introduction
5