Table of Contents
Advertisement
Some Parameter Edit displays have just one numeric
parameter, while other may have two or more.
Parameter Edit Display with One Numeric Parameter
1.
Numeric values can be changed by rotating
the dial. Dial rotation produces an
immediate, corresponding change in the
selected value.
2.
Press the [ENTER] button to close the
Parameter Edit display after the value(s)
have been edited as required.
Parameter Edit Display with Multiple Numeric
Parameters
1.
Use the cursor buttons – [
– to select the value to be edited.
2.
3.
4.
E
] [
] [
] [
F
]
Rotate the dial to edit the value as required.
Repeat step 1 to select the next value to be
edited, use the dial to edit as required, and
repeat until all values have been edited as
required.
When all values have been edited, press the
[ENTER] button. A confirmation window will
appear: press [ENTER] one more time to
confirm the edits and close the window.
ENTER
ENTER
ENTER
ENTER
NOTE
You can close the window without changing any values
by pressing the [CANCEL] button rather than the
[ENTER] button.
DME64N/DME24N Owner's Manual
Parameter Edit Displays
37
Advertisement
Table of Contents
