Start Recording; Stop Recording; Play Back The Recorded Performance - Yamaha Clavinova CLP-265GP Owner's Manual

2.
Engage Record Ready mode.
Press the button to engage Record Ready mode. This automatically selects
[REC]
an empty song for recording and makes the RIGHT part active. If an empty
song does not exist, Song U01 will be selected. Recording does not actually start
yet.
The amount of memory available for recording will be shown on the LED dis-
play in approximate kilobytes. The
the current METRONOME tempo setting.
You can turn on the metronome in this step, and adjust the tempo by using the
[TEMPO/FUNCTION# ▼, ▲]
Record Ready mode can be disengaged before recording by pressing the
button again.
3.

Start recording.

Recording will begin automatically as soon as you play a note on the keyboard
or press the
SONG [PLAY/PAUSE]
appear on the display while recording.
4.

Stop recording.

Press either or
[REC] SONG [STOP]
stopped, dashes appear in the display in succession to indicate that the recorded
data is being saved to the instrument automatically. After the data is saved, the
song name (U01-U03) appears in the display. The recorded part's indicator will
glow green to indicate that it now contains data. (Record mode is disengaged
automatically.)
CAUTION
Do not turn off the power of the instrument when dashes appear in the display in suc-
cession. Doing so may delete all song data in the instrument, including external songs
(page 34).
5.

Play back the recorded performance.

Press the SONG [PLAY/PAUSE]
To stop playback in the middle of a song, press the
indicator will flash at
SONG [PLAY/PAUSE]
buttons. (Range: 32-280)
button. The current measure's number will
button to stop recording. When recording is
button to play back the recorded performance.
SONG [STOP]
Recording Your Performance
The amount of memory avail-
able for recording:
This value in kilobytes (a unit
used of measurement for data)
indicates how much space
remains available for recording
on the Clavinova. You can
record up to a maximum of
about 11,000 notes on the
CLP-265GP depending on pedal
usage and other factors.
If you have selected the LEFT
part previously in the same
[REC]
song, the LEFT part will auto-
matically be made active when
pressing the [REC] button in
step 2.
If the metronome was on when
you started recording, you'll be
able to keep time with the met-
ronome while recording, but
the metronome sound will not
be recorded.
For more recording informa-
tion, see page 32.
The left pedal can be assigned
to start recording via the "Left
Pedal Mode" function described
on page 42.
The record part indicator will
begin to flash when the
recorder memory is almost full.
If the memory becomes full
during recording, "Full" will
appear on the display and
recording will stop automati-
cally. (All recorded data up to
that point will be retained.)
Pressing the SONG [PLAY/
button.
PAUSE] button to start record-
ing, then pressing the SONG
[STOP] button to stop record-
ing will erase all previously-
recorded data on the selected
part.
CLP-265GP Owner's Manual
NOTE
NOTE
NOTE
NOTE
NOTE
NOTE
NOTE
29