Transpose; Dual Mode (Mixing Two Voices Together); Voice Selectors - Yamaha Clavinova CLP-611 Owner's Manual

TRANSPOSE

This feature allows you to shift the pitch of the entire keyboard, so that you
can continue to play in a signature that you are comfortable with while at the
same time "transposing" to match the key of a singer or of another instru-
ment. You can set the transposition in semitone increments. If you set it to 5,
for example, then each keyboard C will produce the sound of F, and any song
played in key of C will be produced in key of F.
[TRANSPOSE]
MASTER VOLUME
PIANO 1
FUNCTION TRANSPOSE SPLIT
MAX
BRILLIANCE REVERB EFFECT TOUCH VIBES
MIN
Procedure
Hold down [TRANSPOSE] and
press [-/NO] or [+/YES] to set the
transposition interval, in semitone
increments. You can set to any
value from -12 to +12; the default
setting is 0.

DUAL Mode (Mixing two voices together)

This feature selects simultaneous play of any two voices. You can combine dissimilar voices for a duet-
like sound, or try working with similar voices to create a complex, layered type of sound.
MASTER VOLUME
FUNCTION TRANSPOSE SPLIT PIANO 1
MAX
VIBES
BRILLIANCE REVERB EFFECT TOUCH
MIN
Procedure
Entering DUAL mode
1
Simply press the two
appropriate voice selectors
at the same time (hold one
down and then press the
other).
The voice indicators for
both voices will come on.
* The screen shows the name
for both voices, with the
lowest-numbered voice first
(in accordance with the voice
numbering shown at right).
HARPSI-
PIANO 2 CLAVI.TONE E.PIANO1 E.PIANO2 CHORD VARIATION
PIPE ORGAN
STRINGS CHOIR ORGAN COMBINATION BASS
TRANSPOSE
ROOM
NORMAL
BRILLIANCE REVERB EFFECT
If transposition is set to nonzero, these indications and
the numerical setting will remain on the screen.
1 2
HARPSI-
PIANO 2 CLAVI.TONE E.PIANO1 E.PIANO2 CHORD VARIATION
PIPE ORGAN
STRINGS CHOIR ORGAN COMBINATION BASS
First voice
(Voice
ROOM
NORMAL
BRILLIANCE REVERB EFFECT
Voice numbering
(CLP-811)
[–/NO] [+/ YES]
SONG
TRANSPOSE SPLIT
MEASURE
MELLOW ROOM CHORUS HARD
NORMAL HALL 1 SYMPHONIC MEDIUM
TEMPO
BRIGHT HALL 2 TREMOLO SOFT
STAGE ECHO FIXED
BRILLIANCE REVERB EFFECT TOUCH
Transposition value (semitones)
MEDIUM
TEMPO
TOUCH
SONG
TRANSPOSE SPLIT
MEASURE
MELLOW ROOM CHORUS HARD
NORMAL HALL 1 SYMPHONIC MEDIUM
TEMPO
BRIGHT HALL 2 TREMOLO SOFT
STAGE ECHO FIXED
BRILLIANCE REVERB EFFECT TOUCH
Second voice
# #
1) (Voice 2)
MEDIUM
TEMPO
TOUCH
1 3 6
2 4 5
HARPSI-
PIANO 1 PIANO 2 CLAVI.TONE E.PIANO1 E.PIANO2 CHORD
PIPE
ORGAN
VIBES STRINGS CHOIR ORGAN COMBINATION BASS
7 8 9 10
11 12
CLP-811/611
RECORDER
DEMO/
METRONOME PIANO SONG 1 2
SONG START/
TEMPO SELECT STOP REC
– +
/ NO / YES
Transposition settings...
-12: Down by twelve semitones
(one octave)
0: No transposition; notes
produce their standard pitch
+12: Up by twelve semitones
(one octave)
High and low pitch limitations
The CLP-811/611 does not
produce pitches above C7 (the
highest note on an 88-key
keyboard) or below A-1 (the
lowest note). If you transpose up
by n semitones, the highest n
keys on the keyboard are
automatically sounded one octave
lower than the expected tone. If
you transpose down, the lowest
keys are automatically raised.
RECORDER
DEMO/
METRONOME PIANO SONG 1 2
SONG START/
TEMPO SELECT STOP REC
– +
/ NO / YES
DUAL or SPLIT...
It is not possible to use the DUAL
and SPLIT features at the same
time.
Handling of VARIATION
The current VARIATION setting
for each voice remains in effect
when you first enter DUAL mode;
the VARIATION indicator will be
lit if VARIATION is selected for
either or both voices. Once you
have entered the mode, each
press of [VARIATION] switches
variation ON or OFF for both
voices together. If you need to
set variation ON for one voice
only, you must do so before
entering DUAL mode.
Selecting and Playing Voices
17