Setting The Nudge Time - Yamaha D24 Owner's Manual

54
Chapter 5—General Operation

Setting the Nudge Time

The length of the section to be auditioned is set using the Nudge Time function.
Press the [UTILITY] button.
1
The UTILITY indicator lights up.
Use the JOG/DATA dial to select "NUDGE TIME," and then press the [ENTER]
2
button.
The currently set nudge time appears on the display.
Use the JOG/DATA dial to set the nudge time to 20, 50, or 100 ms.
3
The default setting is 100 ms.
Press the [ENTER] button to activate your selection, or the [CANCEL] button
4
to cancel the Nudge Time function.
Press the [UTILITY] button again to leave utility.
5
The UTILITY indicator goes out.
D24—Owner's Manual