Re-Recording Track 1 - Yamaha PF-500 Owner's Manual

5.
Play back the recorded performance.
Press the SONG [START/STOP] button to play back the
recorded performance.
When playback is complete, it automatically stops and the PF-500
locates the top of the song. To stop playback in the middle of a song,
press the [TOP] button. You can also pause playback by pressing the
SONG [START/STOP] button. Playback stops when you press the
button.
When you turn off the power to the PF-500, the recorded performance
data will be lost. If you wish to keep the recording, save the data using the
SaveToMemory parameter (page 45) in the File menu.

Re-recording TRACK 1

This section explains how to record again in case your performance was not satisfactory.
Procedure
1.
Select a voice or voices for recording, if necessary.
Repeat Step 2 on page 36 if you wish to change the previ-
ous settings.
Follow the procedure from Step 3 on page 36 to re-record.
The original performance data will be overwritten by new performance data.
Recording Your Performance
NOTE
To erase recorded data from
a track, use the Channel
Clear parameter in the
"SONG SETTING" menu.
(See page 66.)
37
PF-500