Yamaha RM1x Owner's Manual page 71

Chorus Edit
page1
Parameter
LFO Frequency
LFO Depth
FB Level
Delay Offset
* For information about how to change values, refer to the Basic Operation (page26).
page2
Parameter
Send Chorus to Reverb
Chorus Pan
* For information about how to change values, refer to the Basic Operation (page26).
Reverb Edit
page1
Parameter
Reverb time
Diffusion
InitDelay
HPF Cutoff
* For information about how to change values, refer to the Basic Operation (page26).
Values
0.00Hz ... 39.7Hz
000 ... 127
-63 ... 00 ... +63
000 ... 063
Values
000 ... 127
L63 ... C ... R63
Values
0.3s ... 30s
00 ... 10
00 ... 63
THRU, 22Hz ... 8.0kHz
Function
Sets delay modulation frequency.
Sets delay modulation depth.
Sets level at which the delay output is returned to the input (nega-
tive values invert the phase).
Sets offset value for delay modulation.
Function
Sets level on bus from chorus block to reverb block.
Sets stereo positioning of signal from chorus block.
Function
Sets reverb length.
Sets spread of the reverb.
Sets delay time until the early reflections.
Sets frequency at which the high pass filter will cut the low range.
9. Effect
71
RM1x SEQUENCE REMIXER