Panasonic CF-30 Series Operating Instructions Manual page 29

Display
The screen does not become
bright even if pressing Fn F2 .
+
The screen is disordered.
During Simultaneous display,
one of the screens becomes
disordered.
The external display does
not work normally.
<Only for model with GPS>
The cursor cannot be con-
trolled properly.
Touch Pad / Touchscreen (only for model with touchscreen)
The cursor does not work.
Cannot input using the touch
pad.
<Only for model with touch screen>
Cannot input using the touchscreen.
Cannot point the correct posi-
tion using the included stylus.
Reference Manual
The Reference Manual is
not displayed.
Others
No response.
Cannot enter characters
correctly.
The brightness is set low to avoid malfunction where surrounding temperature is high.
Use it in an environment of between 5°C and 35°C.
Changing the number of display colors and resolution may affect the screen. Restart the computer.
Connecting/disconnecting an external display may affect the screen. Restart the computer.
When using the Extended Desktop, use the same display colors for the external display
as those used by the LCD.
If you continue to experience problems, try changing the display.
Right-click on the desktop, and click [Graphics Properties] - [Display Devices].
Simultaneous display cannot be used until Windows startup is complete (during Setup
Utility, etc.).
If the external display does not support the power saving function, it may not work nor-
mally when the computer enters the power saving mode. Turn off the external display.
Operate the following steps.
A Restart the computer and press
B Set [GPS] to [Disable] in the sub-menu of [Serial and Parallel Port Settings] in the
[Advanced] menu of the Setup Utility.
F10
C Press and select [Yes] at the confi rmation message, and press
The computer will restart.
D Log on to Windows as an administrator.
E Click (Start) and input "c:\util\drivers\gps\GPSVista.reg" in [Start Search], and
Enter
press .
F Click [Yes] and click [OK]. The computer will restart.
F2
G Press while [Panasonic] boot screen is displayed.
H Set [GPS] to [Enable] in the sub-menu of [Serial and Parallel Port Settings] in the
[Advanced] menu.
F10
I Press and select [Yes] at the confi rmation message, and press
When using the external mouse, connect it correctly.
Restart the computer using the keyboard.
Press and press
If the computer does not respond to keyboard commands, read "No response" (
Set [Touch Pad] to [Enable] in the [Main] menu of the Setup Utility.
The drivers for some mice may disable the touch pad. Check your mouse's operating instructions.
Set [Touchscreen Mode] to [Auto] or [Tablet] in the [Main] menu of the Setup Utility.
Perform the touchscreen calibration (
Install Adobe Reader.
< For localized OS model >
A Log on to Windows as an administrator.
(Start)
B Click and input "c:\util\reader\setup.exe" in [Start Search] then press
C Update Adobe Reader to its latest version. If your computer is connected to the inter-
net, start up Adobe Reader and click [Help] - [Check for Updates].
< For MUI OS model >
page 14
Ctrl Shift Esc
Press + +
that is not responding.
An input screen (e.g., password input screen at startup) may be hidden behind another
Alt Tab
window. Press +
Slide the power switch for 4 seconds or longer to shut down the computer, and then slide the
power switch to turn it on. If the application program does not work normally, uninstall and
reinstall the program. To uninstall, click
Select the same language setting for Windows and the internal keyboard (
"5 Setup Windows.").
F2
while [Panasonic] boot screen is displayed.
3 times, and press to select [Restart] and press
page 15).
to open Task Manager and close the software application
to check.
(Start) - [Control Panel] - [Uninstall a program].
Enter
.
Enter
.
.
Enter
below).
Enter
.
page 13
29